Philips dvp 7400s-98 ユーザーズマニュアル

47

–  Press STOP button twice before selecting the setup/system 

menu.

–  Depending on the disc availability, some menu items cannot 

be selected.

–  Insert a readable disc with the playback side facing down.
–  Check the disc type, colour system (PAL/NTSC) and region 

code.

–  Check for any scratches or smudges on the disc.
–  Press SYSTEM MENU to turn off the setup menu screen.
–  You may need to enter the password in order to change the 

parental rating level or to unlock the disc for playback.

–  Moisture may have condensed inside the system. Remove the 

disc and leave the system turned on for about an hour.

–  Disconnect the power cord from the power outlet for a few 

minutes. Reconnect the power cord and try to operate again 
as usual.

–  Check the disc for fi ngerprint/scratches and clean with a soft 

cloth wiping from centre to edge.

–  Check that the output of the video signal is switch to 

{ YPbPr }.

–  Check that the DivX

®

 fi le is encoded in ‘Home Theatre’ 

mode with DivX

 5.x encoder.

–  Check that the DivX

 movie downloaded is a complete fi le.

–  The audio codec may not be supported by this DVD player.

– Check 

that 

fi le size of the movie does not exceed the fi le size 

of the disc during downloading.

–  Check the connection between the TV and the HDMI jack of 

DVD player.

–  See if the TV supports this 480p/576p/720p/1080i DVD 

player.

–  Check your TV system setup correctly.
–  Make sure HDMI audio setting is set to {ON} in the System 

Menu.

01-49 dvp7400_98_eng2.indd   47

01-49 dvp7400_98_eng2.indd   47

2006-10-12   3:08:42 PM

2006-10-12   3:08:42 PM