Philips dvp721vr ユーザーズマニュアル
Before Operation - VCR part
12
Using your DVD+VCR for the
very first time
very first time
For the following steps we assume that you have just
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR
incorporates the Automatic Channel Memory
System (ACMS)
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR
incorporates the Automatic Channel Memory
System (ACMS)
.This system will automatically tune,
store TV channels and set the clock (date & time) in your
DVD+VCR.
DVD+VCR.
IMPORTANT!
If you have used a RF Antenna input connection,
refer to ‘TV with RF Input only’ on page 13.
refer to ‘TV with RF Input only’ on page 13.
1
Make sure that you have correctly installed your
DVD+VCR.
DVD+VCR.
Press 1
1 to turn on your DVD+VCR.
If the initial Menu Screen doesn’t appear on screen, make
sure that you have tuned your TV to a video channel. Or if
this is correct it may mean that your DVD+VCR is already
tuned.
sure that you have tuned your TV to a video channel. Or if
this is correct it may mean that your DVD+VCR is already
tuned.
2
Press OK to start the automatic tuning process.
Programme number TV Station
PR01
BBC1
PR02
BBC2
PR03
ITV
PR04
CH4
PR05
CH5
PR06
Satellite
The TV station shown above may vary according to the
area you live in.
area you live in.
4
Press SYSTEM MENU to remove the menus from
the TV screen.
the TV screen.
Setting the clock Manually
The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic
Channel Memory System) when you DVD+VCR detects a
channel that broadcasts a Teletext signal. If the broadcast
signal is weak the clock will not be set and will require
setting manually.
settings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic
Channel Memory System) when you DVD+VCR detects a
channel that broadcasts a Teletext signal. If the broadcast
signal is weak the clock will not be set and will require
setting manually.
1
Press SYSTEM MENU.
Press b or B to select TIME DATE.
Press OK.
The auto adjust mode can be set to ‘OFF’ by pressing 3
or 4 if you want to set the time manually.
Press OK.
Press b or B to select TIME DATE.
Press OK.
The auto adjust mode can be set to ‘OFF’ by pressing 3
or 4 if you want to set the time manually.
Press OK.
2
Use the numbered buttons on the remote control to
alter the HOURS, MINUTES, DAY, MONTH and
YEAR
alter the HOURS, MINUTES, DAY, MONTH and
YEAR
.
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when you
enter the year.
1pm will be displayed as 13:00.
The day of the week will appear automatically when you
enter the year.
3
If you make a mistake press b
b or B
B and enter the
correct details.
4
Press SYSTEM MENU.
HH
MN
DD
MM
YY
:
.
.
00
1
01
04
THU
i
1 2
TIME
DATE
8
HH
MN
DD
MM
YY
:
.
.
- -
- -
- -
- -
- -
- - -
i
1 2
TIME
DATE
AUTO
ADJUST
- -
i
1 2
TIME
DATE
ON
:
OK
01
C02
00
BBC1
02
C03
00
BBC2
03
C04
00
ITV
E
S
i
Pr-12
ACMS
OK i
Pr-12
ACMS
ACMS