Philips g-code 7819901511 ユーザーズマニュアル

Timer Recor

ding

Setting Timer Program

(G-Code Mode)

There are two ways to set up timer programs using

G-Code system. For more information on how to set up

the system, see ‘Setting up the G-Code System’.
Path 1:

1. Press G-Code button to display the G-Code menu.

Path 2:

1. Press TIMER to display the Timer Record menu.
2. Press OK to start a new setting, or press  to select

a previous setting which you would like to modify, then

press OK.

3. Press  to go to the ‘G-Code’ button, then press

OK to display the G-Code setup menu.

..........................................................................................

1. Press number buttons (0-9) or to enter the

G-Code number, then press OK.

Timer_03_01

Details of the preset program will be displayed.

2. The ‘Preset Channel’ dialogue box will be displayed,

if the DVD recorder fails to ﬁnd information of a cor-

responding channel. Press or number buttons

(0-9) to enter the channel number shown on your TV,

then press OK.

Timer_03_01

To make use of the G-Code system for timer record-

ing, you need to match the GCNs (guide channel

numbers) used by the G-Code system with the

channel numbers shown on your TV, so that the

relevant information can be correctly assigned to the

programs you would like to record.

3. Set ‘Mode’ (recording mode) and ‘Repeat’ (recording

frequency) for the timer program.
Press  to select one of the setting, then press OK

to go to the sub-menu. Press to select, then press

OK to conﬁrm your selection.

4. Follow step 6-8 in ‘Setting Timer Program [Date/Time

Mode]’ to complete the setting.



If you want to return to the Date/Time mode, press



to select ‘Date/Time Setting’, then press

OK. However, please note that all the settings you

have entered will be cleared once you exit the present

setup screen.



If you would like to delete a timer program set

previously, go to Timer Record menu, highlight the

bin icon located in the ﬁrst column of the entry you

want to delete, then press OK.

Notice for Timer Recording

1. To stop a timer-recording session:

Press STOP to cease the timer recording. Please note

that it may take a few seconds before the program is

completely brought to an end.

2. To check the recording status while ‘Timer Record’

is active:

Press DISPLAY to bring up the Timer Record informa-

tion on screen.

3. About the overlap of timer programs

1. Each time after you complete and save the settings of

a timer program, the DVD recorder will check if this

program overlaps with other ones you set previously.

2. If the current timer program does overlap with one

or more than one programs, a window asking if you

would like to keep current setting will appear.

Timer_03_01

......

3. If you select ‘Yes’, the screen will go back to Timer

Record menu. Under this circumstance, the later

program takes priority, which means the DVD

recorder stops recording the earlier program at the

start time of the later program.

4. If you select ‘NO’, the screen will go to the setting

page. You need to change or discard the setting of this

program.