Philips hr2860 ユーザーズマニュアル

Hold the motor unit firmly with both hands when the appliance operates. 
Do not operate the blender for more than 1 minute at a time.
If you have not finished blending after 1 minute, switch off the appliance 

and wait 1 minute before you continue. If the appliance becomes hot, let

it cool down before you continue.
Never reach into the blender beaker with your fingers or an object (e.

g. a spatula) while the blender operates.
Do not touch the sharp blades. If the blades get stuck, unplug the 

appliance and remove the ingredients that block the blades with a 

spatula.

To avoid spillage, never fill the blender beaker above the maximum 

level indication (0.4 litres).

You can pour liquid ingredients (e.g. oil) into the blender beaker

through the opening in the lid while the appliance operates (Fig. 5).

Cut solid ingredients into smaller pieces (1-2cm) before you put

them in the blender beaker. Do not process a large quantity of solid

ingredients at the same time. Process these ingredients in a series of

small batches instead.
Dry mill
The dry mill is intended for grinding dry ingredients (Fig. 6).

The dry mill is not suitable for chopping very hard ingredients like 

nutmeg.

Do not touch the sharp blades. If the blades get stuck, switch off the 

appliance and disassemble the dry mill beaker. Use a spatula to remove 

the ingredients that block the blades.

 1 

 Put the dry ingredients in the dry mill beaker (Fig. 7).

Do not fill the dry mill beaker beyond the MAX indication.

See the table for the recommended quantities

-

-

-

-

10