Philips hts3306-f8 ユーザーズマニュアル

EN - 22

After you have completed all the connections, you must 
find the viewing channel (external input source) on your 
TV.
1. After you have made all the necessary connections, 

press [ (standby/on)] to turn on the unit.

2. Turn on your TV.
3. Press the button on the TV’s remote control that 

accesses the external input channel. It may be labeled 
“SOURCE”, “AV”, “AUX” or “SELECT” (refer to your 
TV’s user manual). Or press “2” on the TV’s remote 
control, then press channel down button repeatedly 
until you see the Philips splash screen.

This is the correct viewing channel (external input 
source).
• If the TV is connected by an HDMI cable, it may take 

a while for the Philips splash screen to come up.

• If a certain amount of time has passed since you 

turned on the unit, welcome screen appears the first 
time you turn on this unit.

Please follow the instructions below to complete the initial 
setup.
1. While welcome screen is displayed, use [

] to 

select “Next”, then press [OK].

2. Language setup screen will appear. Use [

] to 

select your language, then press [OK].

3. Quick start mode setup screen will appear. Use 

] to select the desired mode, then press [OK].

4.  Auto software update setup screen will appear. Use 

] to select the desired mode, then press [OK].

5. Network setup screen will appear. Use [

] to 

select the desired mode, then press [OK].
• If you select “Wired”, refer to “Wired” on page 40 

for further operation.

• If you select “Wireless”, refer to “Wireless” on 

page 42 for further operation.

Please select your 
language for on-screen 
display.

English

Español

Français