Philips hts5506-f8 ユーザーズマニュアル

EN - 28

C Caution

•

Do not remove the USB storage device or switch the 
unit to standby mode while the contents of the device 
are being accessed. It may result in malfunction or loss 
of the device data.

•

Philips cannot be held responsible if your USB storage 
device is not supported, nor will Philips accept any 
liability for damage or loss of stored data.

•

If a USB card reader is connected, files in an SD card 
which is connected first to the slot of the reader will be 
displayed.

D Note

•

The resume information will be cleared when;
- [

(stop)] is pressed while in the Resume-On-Stop 

mode.

- the USB storage device is removed.
- the unit is switched to standby mode.

•

Do not delete the folders or files in the USB storage 
device with your computer. This unit may not read USB 
storage devices formatted on a computer.

•

If a folder or file name includes one of the following 
unrecognizable characters, the folder or file name may 
not be displayed correctly.
- Unrecognizable characters: 

•

This unit can read MP3 / WMA / JPEG files in an SD 
card by using USB card reader (not supplied).

On this unit, you can play video, music and photo files 
stored on DLNA certified home media servers connected 
to your home network. In order to use this feature, you 
must connect this unit to the Internet. (unwarranted for 
wireless environment)
•

For details, refer to the user manual of the DLNA 
certified device.

1. Follow steps 1 to 2 in “Before Using Network Services” 

on page 36.

2. Start DLNA home media servers in your home 

network.

3. Press [

(home)].

4. Use [

] to select “Home Network”, then 

press [OK].
• This unit will start loading the home server list.
• To cancel loading, press [

(stop)].

• To reload the home server list, press [Yellow].

5. After loading, home server list will appear. Select a 

home server you want to access, then press [OK].

6. File list of the selected home server will appear. Select a 

file you want to play back, then press [

(play)] or 

[OK] to start playback.
• If you select a folder, select a file in the folder and 

then press [

(play)] or [OK] to start playback.

• Refer to “Guide to File List” on page 25.

•

For the home server list, maximum of 10 servers can be 
displayed.

•

The system can recognize up to 9,999 files (including 
folders).

•

The 10th and deeper hierarchies cannot be displayed.

•

This unit supports following formats. (Formats other 
than listed below cannot be recognized.)
- Video : MPEG 1, MPEG 2 PS, MPEG 2 TS / TTS
- Music : LPCM, MP3, WMA
- Photo : JPEG

•

Unplayable files in the home server will not be 
displayed in the file list.

•

For some files, playback is not available even if displayed 
in the file list.

•

In order to play back the contents in the home servers, 
the player and the servers must be connected to the 
same access point.

. , " = + [ ] ; / \ : | ¥

For video files, playback will be step by 

step in pause mode.

During playback, press to fast reverse/

forward the playback.

Pause the playback.

Return to normal playback.

Stop the playback. (For video files, 

playback will be in Resume-On-Stop 

mode.)

Resume-On-Stop mode for video 
files
Playback will start from the point where 

it is stopped next time you press 

(play)]. If you press [OK] instead 

of [

(play)], playback will start from 

the beginning of the file instead of 

resuming from the stop point.

8 / 1234

0 : 00 : 12

DATA

Photo

Video

MP3_1.mp3

WMA_1.wma

JPEG_1.jpg

JPEG_2.jpg

M2TS_1.m2ts

File List

Track

Time

Page Up

Page 

Down

Server List