Philips mcd280-21m ユーザーズマニュアル
14
English
Connections
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
●
Use the composite cable (yellow) to connect the
system’s CVBS jack to the video input jack on
the RF modulator.
system’s CVBS jack to the video input jack on
the RF modulator.
●
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s RF jack.
connect the RF modulator to your TV’s RF jack.
AUDIO IN
R L
R L
VIDEO
IN
TO TV
ANT IN
CH3 CH4
RF coaxial cable to TV
Back of RF Modulator
(example only)
Antenna or
Cable TV signal
Pr/Cr
Pb/Cb
Y
S-VIDEO OUT
VIDEO OUT
DIGITAL OUT
FM aerial 75
COMPONENT VIDEO OUT
Step 4: Connecting the
subwoofer (
not
supplied
)
speaker
(right)
speaker
(left)
Subwoofer
4
-
L
+
+
R
-
SUBWOOFER OUT
SPEAKER
8
IMPORTANT!
Ensure that the speaker cables are
correctly connected. Improper
connections may damage the system due
to short circuit.
Do not connect speakers with an
impedance lower than that of the
speakers supplied.
Ensure that the speaker cables are
correctly connected. Improper
connections may damage the system due
to short circuit.
Do not connect speakers with an
impedance lower than that of the
speakers supplied.
●
Place the subwoofer on the floor near the TV.
●
Connect the subwoofer to the SUBWOOFER
OUT jack on the DVD micro system.
OUT jack on the DVD micro system.
●
Connect the power cable for the subwoofer.