Philips gogear sa1102 ユーザーズマニュアル
10
Technical Data
Power supply
AAA alkaline*
Picture / Display
Mono display, 32 x 128 pixels
Sound
Channel separation
40dB
Equalizer settings
Rock / Jazz / Pop / Classical / off
Frequency response
30-18000Hz
Signal to noise ration
>85dB
Output Power (RMS)
2 x 5mW
Audio Playback
Compression format
MP3 (8-320 kbps and VBR; Sample rate: 8, 11.025, 16, 22.050, 24, 32, 44.1, 48kHz)
WAV
WMA (5-192kbps)
WAV
WMA (5-192kbps)
ID3-tag support
Song title and artist name
Audio Capturing
Built-in microphone
Mono
Storage Media
SA110X 512MB NAND Flash **
SA111X 1GB NAND Flash **
SA111X 1GB NAND Flash **
Connectivity
Headphones 3.5mm, USB 2.0 +
Music transfer
Drag and drop in Windows Explorer
System Requirements
Windows® 98 SE, Me, 2000 or XP
Pentium Class MMX 166MHz processor or better
96MB RAM
50MB hard drive space
Internet connection
Microsoft Internet Explorer 5.5 or later
Video display card
Soundcard
USB port
Pentium Class MMX 166MHz processor or better
96MB RAM
50MB hard drive space
Internet connection
Microsoft Internet Explorer 5.5 or later
Video display card
Soundcard
USB port
*
Battery life varies by use and settings.
** 1MB = 1 million bytes; available storage capacity will be less.
1GB = 1 billion bytes; available storage capacity will be less.
Full memory capacity may not be available as some memory will be reserved for the player.
Storage capacity based on 4 minutes per song and 64 kbps WMA.
Full memory capacity may not be available as some memory will be reserved for the player.
Storage capacity based on 4 minutes per song and 64 kbps WMA.
+ Actual transfer speed may vary based on your operating system and software configuration.