Philips showview dvdr3380 ユーザーズマニュアル

ページ / 66
English
18
TIPS:  Before making or changing any connections, make sure that all the devices are disconnected 
from the power outlet.
Step 2: Optional Connections
 (continued)
A
B
C
Back of a VCR 
(Example only)
Connecting to a VCR or 
other similar device
This connection enables you to record
from video tape to a DVD±R/±RW and
allows the VCR to be used for playback if
the recorder is turned off.
IMPORTANT!
Your new recorder can replace the
VCR for all your recording needs.
Just unplug all the connections to
your VCR.
A
 Connect the existing Aerial/Satellite/
Cable TV signal (or from the Cable Box/ 
Satellite Receiver, labelled as RF OUT or 
TO TV) to the ANTENNA-IN 
 
socket on the recorder.
B
 Use the supplied RF coaxial cable to 
connect the TV-OUT 
 socket on the 
recorder to the aerial input socket (or 
labelled as VHF/UHF RF IN) on your TV.
C
 Use the SCART cable to connect the 
EXT1 TO TV-I/O socket on the 
recorder to the corresponding SCART 
input socket on the TV.
D
 Use another SCART cable to connect the 
EXT2 AUX-I/O socket on the recorder 
to the SCART output socket (or labelled 
as TV OUT or TO TV) on the VCR.
Helpful Hints:
– Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
– Connect the recorder directly to the TV. If
there is a VCR or an additional device in
between, the picture quality may be poor
because of the copy protection system built
into this recorder.
ANTENNA-IN
TV-OUT
~
MAINS
TO TV - I/O
EXT
1
AUX - I/O
EXT
2
AU D IO
O U T
S-V ID E O
IN
V ID E O   IN
TV
 
 
VIDEO 
IN 
OUT
IN
AUDIO
L
AUDIO
R
 
 
VIDEO 
OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
TV OUT
TV IN
   
    
  
   
   
    
  
    
CABLE
SATELLITE
ANTENNA
D