Philips streamiun was7500 ユーザーズマニュアル
The following steps show how to get DNS and Gateway settings of the current
network from the PC connected to the same network:
network from the PC connected to the same network:
1
On your PC, click Start > Run
2
Type cmd and click OK
3
Type ipconfig/all
4
Write down the DNS and Gateway of the current connection.
On
1
1
Press
MENU
to enter the menu screen.
2
Use
3
or
4
and
2
to enter Settings followed by Network, then Wired.
3
Press
2
to continue.
Set DNS
1
1
Enter the DNS server you wrote down.
2
Press
OK
to confirm.
3
Press
OK
to skip Set DNS2.
Tip
If necessary, follow Steps 1 and 2 above to set a secondary DNS server in Set DNS2.
Set Gateway
1
1
Enter the Gateway you wrote down.
2
Press
OK
to confirm.
Set proxy
1
1
If you are using a proxy server to visit websites, enable Proxy and proceed with the proxy
setting as prompted, then press
setting as prompted, then press
OK
to confirm Otherwise, press
OK
to skip.
2
Choose to apply the settings as prompted.
>
Settings will change.
Connection to station could be lost appears.
Connection to station could be lost appears.
Network settings
74