Philips VR660BPH ユーザーズマニュアル

When you put a tape in the VCR, the power will come on automatically. If
the tape’s record tab is missing, playback will begin. You can not insert a
tape without a record tab if the VCR power is off and a timer recording is
set.

When a tape is played, fast forwarded, or recorded to its end, the VCR will
rewind the tape to the beginning, then stop. The VCR will not rewind the
tape if the end of the tape is reached during a One-Touch Recording. Details
are on page 32.

When the POWER button is pressed while the VCR is rewinding a tape,
REWIND

→

POWER OFF will appear on the screen. When the tape has fin-

ished rewinding, the VCR will stop, then turn itself off. 

A tape can be ejected with the VCR power on or off (but the VCR must be
plugged in).
If a timer recording is programmed, the 

r

and Cassette-Inside lights will

flash on the VCR’s display panel after you eject a tape with the VCR power
turned off.

The real-time counter will reset to 0:00:00 when you insert a cassette.
To reset the real-time counter to 0:00:00 at anytime, press the CLEAR but-
ton on the remote control.

The VCR continually adjusts tracking to give you the best possible picture
quality. With some recordings, however, you may get a better picture by
adjusting the tracking manually (see below).

• Press the CHANNEL 8/9 buttons on the front panel or the CH(annel) 8/9

• The CH(annel) 8/9 button adjusts tracking during normal tape playback and

the CHANNEL 8/9 buttons on the VCR at the same time.