Philips td6311-hh059p ユーザーズマニュアル

Your Onis Memo recorder

Switching on the memo recorder by remote control

Before you can call into your memo recorder by remote control, you need to enter

a remote control code (see Entering a remote control code on page 16).

Dial your telephone number. Let it ring 9 times.

The memo recorder will start up and send back a waiting tone.

Press

on the telephone and enter your remote control code.

Press 7 on the telephone keypad and hang up.

Your memo recorder is once again ready to handle calls.

Calling into your memo recorder by remote control

You can call into your memo recorder from any telephone by calling your own

telephone number.
If your memo recorder does not answer, the memory is full or the memo recorder

is not switched on.

Dial your telephone number then, during the outgoing message, press

on the telephone.

Enter your 4 digit code.

If the code is correct, your memo recorder will play back any messages

automatically.

If the code is wrong, the outgoing message will be repeated. During the

outgoing message, try entering your code again. The memo recorder will

hang up after 3 unsuccessful attempts.

During the call you can enter remote control codes, e.g. 1 to repeat the

current message, 3 to listen to the next message, and so on (see your
Remote Control Memo card for details).

Your Oniso handset allows you to enter all available remote control functions

(except Erase all messages). The symbols printed on the keys indicate their

remote control function, e.g.

(key 3) to listen to the next message.

Hang up to end the call.

The memo recorder will return to the mode it was in before your call unless

you press 9 to switch off the memo recorder. If it was on, it stays on and is

ready to handle calls.