Philips vr1010bp99 ユーザーズマニュアル
4,5
3
2
Insert a tape in the VCR.
• Pressing the POWER button to turn
on the VCR will set AUTO DBS
RECORD LINK to OFF automatically.
RECORD LINK to OFF automatically.
• Do not turn on the DBS before the
program starts; otherwise, the VCR
will start recording when the DBS
power is turned on.
will start recording when the DBS
power is turned on.
• Depending on the type of DBS, the
VCR may not record the first few
seconds of the program. Or, the VCR
may record slightly longer than the
actual length of the program.
seconds of the program. Or, the VCR
may record slightly longer than the
actual length of the program.
• If a Record Link is set, regular timer
recordings will not occur.
• “E rL” will flash on the display panel
after the VCR turns off if the DBS
power is on. Turn off the DBS
power. “L-1” will blink on the VCR
display panel.
power is on. Turn off the DBS
power. “L-1” will blink on the VCR
display panel.
• S-VHS MODE, FRONT A/V INPUT
and REAR A/V INPUT will not
appear in the VCR SET UP menu if
you have the VR810BPH.
appear in the VCR SET UP menu if
you have the VR810BPH.
Helpful Hints
This feature allows you to automatically record a satellite program
that is programmed on your DBS. The VCR will start recording
when it receives a signal from the DBS. The VCR stops recording
when the DBS signal turns off.
that is programmed on your DBS. The VCR will start recording
when it receives a signal from the DBS. The VCR stops recording
when the DBS signal turns off.
1
Use audio and video cables to connect the AUDIO and
VIDEO OUT jacks of the DBS to the AUDIO and VIDEO
IN jacks on the back of the VCR. Set the program on the
DBS. Turn off the DBS.
VIDEO OUT jacks of the DBS to the AUDIO and VIDEO
IN jacks on the back of the VCR. Set the program on the
DBS. Turn off the DBS.
4
Press the PLAY 8 or STOP 9 button to select VCR SET
UP, then press the OK/STATUS button.
UP, then press the OK/STATUS button.
3
Press the VCR button, then press the MENU button.
6
Press the MENU button. Final Record Link instructions (as in
step one above) will appear on the screen for about 30 seconds,
then the VCR will turn off automatically. “L-1” will blink on the
display panel.
step one above) will appear on the screen for about 30 seconds,
then the VCR will turn off automatically. “L-1” will blink on the
display panel.
1
2
2
5
Press the STOP 9 button repeatedly to go to the next
page of the VCR SET UP menu, then press the STOP 9
button to select AUTO DBS RECORD LINK. Press the
FF : button to set AUTO DBS RECORD LINK to ON.
page of the VCR SET UP menu, then press the STOP 9
button to select AUTO DBS RECORD LINK. Press the
FF : button to set AUTO DBS RECORD LINK to ON.
➔ VCR SET UP
TUNER SET UP
INITIAL SET UP
TAPE MANAGER
INITIAL SET UP
TAPE MANAGER
SELECT: ,9
CONFIRM: OK
END: MENU
Record Link 35
Set the program on the DBS.
Turn off the DBS power.
Turn off the DBS power.
Insert a tape in the VCR.
➔
DSPC ON
ON SCREEN MODE ON
BLUE BACKGROUND
ON SCREEN MODE ON
BLUE BACKGROUND
ON
TIMER REC SPEED MANUAL
VIDEO STABILIZER
VIDEO STABILIZER
OFF
AUDIO OUT
HIFI
NEXT PAGE
SELECT: ,9
CHANGE:
3
END: MENU
PREVIOUS PAGE
STEREO/SAP
STEREO/SAP
STEREO
➔ AUTO DBS
RECORD LINK
ON
S-VHS MODE
ON
FRONT A/V INPUT VIDEO
REAR A/V INPUT
REAR A/V INPUT
VIDEO
SELECT: ,9
CHANGE:
3
END: MENU
VCR
TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
SMARTPICTURE
CH
VOL
MENU
TIMER
TURBO
TIMER
AUDIO/
MUTE
SKIP
SEARCH
TAPE
MANAGER
OK/STATUS
-
..........
..........
+
CBL/DBS
1
— +
*
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
START
STOP
DATE
VPS/PDC
DAILY
SPEED
DBS/SAT
PLAY
REW
FF
STOP
WEEKLY
-
+
-
+
ALT
0
CLEAR
SAT/
6