Philips VR1000 ユーザーズマニュアル
— 27 —
Selecting Recording Format
When shipped from the factory, this
VCR has been set to select
automatically S-VHS format for
recording on an S-VHS tape and VHS
format for recording on a VHS tape. If
you want to make a recording using
VHS format on an S-VHS tape, follow
the procedure below.
VCR has been set to select
automatically S-VHS format for
recording on an S-VHS tape and VHS
format for recording on a VHS tape. If
you want to make a recording using
VHS format on an S-VHS tape, follow
the procedure below.
1
Select Mode Set Screen
1 Press
MENU
.
2 Press
5 or ∞ to select “MODE
SET” then press
OK
or 4.
The Mode Set menu appears.
2
Select Recording Format
1 Press
5 or ∞ to select “S-VHS”.
2 Press
OK
or 4.
Each time you press the button, the
setting changes.
setting changes.
AUTO:
Normally select this.
OFF:
Select this when you want to make a
recording using the VHS format on
an S-VHS tape.
recording using the VHS format on
an S-VHS tape.
3
Finish Setting
Press
MENU
.
Notes:
• When playing a tape that has been
• When playing a tape that has been
recorded in S-VHS, the S-VHS indicator
lights on the display panel regardless of
the “S-VHS” mode setting.
lights on the display panel regardless of
the “S-VHS” mode setting.
Selecting AV1 and AV2 Input signal
This VCR has two AV input terminals
on the rear panel. You have to correctly
set the input signal depending on the
type of unit connected to these
terminals.
on the rear panel. You have to correctly
set the input signal depending on the
type of unit connected to these
terminals.
1
Select Mode Set Screen
1 Press
MENU
.
2 Press
5 or ∞ to select “MODE
SET” then press
OK
or 4.
The Mode Set menu appears.
2
Select AV1, AV2
If you are connected to the AV1 IN/
OUT connector:
1 Press
OUT connector:
1 Press
5 or ∞ to select “AV1
SELECT”.
2 Press
OK
or 4 to select one of the
following:
VIDEO
: If a connected device’s
output is compatible only
with regular video signals.
with regular video signals.
S-VIDEO : If a connected device’s
output is compatible with
Y/C signals. This setting
will let you take advantage
of higher quality S-VHS
pictures.
Y/C signals. This setting
will let you take advantage
of higher quality S-VHS
pictures.
• If “AV2 SELECT” is set to
“DECODER”, it is impossible to set
“AV1 SELECT” to “S-VIDEO”.
“AV1 SELECT” to “S-VIDEO”.
3 Press MENU to return to normal
screen.
MODE SET
DSPC
ON
O. S. D.
ON
DIRECT RECORD
ON
AUTO SP
=LP TIMER OFF
DIGITAL 3R
ON
POWER SAVE
OFF
S-VHS
AUTO
NEXT PAGE
[
5∞] =
[MENU] : EXIT
PREVIOUS PAGE
AV1 SELECT VIDEO
AV2 SELECT
AV2
[
5∞] =
[MENU] : EXIT
If you are connected to the AV2 IN/
DECODER connector.
DECODER connector.
1 Press
5 or ∞ to select “AV2
SELECT”.
2 Press
OK
or 4 to select one of the
following:
AV2
: To use this recorder as
the recording deck,
where the player is
connected to the AV2
IN/DECODER
connector, or to use the
satellite tuner
connected to the AV2
IN/DECODER
connector.
where the player is
connected to the AV2
IN/DECODER
connector, or to use the
satellite tuner
connected to the AV2
IN/DECODER
connector.
DECODER : To use a decoder
connected to the AV2
IN/DECODER
connector.
IN/DECODER
connector.
SAT
: To view a satellite
programme with the TV
set while the recorder is
in Timer mode, in Stop
mode, recording or
turned off. (✈P. 34)
set while the recorder is
in Timer mode, in Stop
mode, recording or
turned off. (✈P. 34)
• If the AV1 OUT switch on the rear
panel is set to Y/C, it is impossible to
set “AV2 SELECT” to
“DECODER”.
set “AV2 SELECT” to
“DECODER”.
3 Press
MENU
to return to normal
screen.
• If you are not connecting a
• If you are not connecting a
decoder or satellite tuner to the
AV2 IN/DECODER connector,
leave “AV2 SELECT” set to
“AV2”.
AV2 IN/DECODER connector,
leave “AV2 SELECT” set to
“AV2”.
• The default setting is “AV2”; if
the VCR’s memory backup has
expired due to a power cut or
because the AC was removed
from the VCR, “AV2” will be
automatically selected when the
power is restored to the VCR. If
you are using a decoder, be sure
to set “AV2 SELECT” back to
“DECODER”.
expired due to a power cut or
because the AC was removed
from the VCR, “AV2” will be
automatically selected when the
power is restored to the VCR. If
you are using a decoder, be sure
to set “AV2 SELECT” back to
“DECODER”.
VR1000/07-New
99.7.8, 3:33 PM
27