Philips VR1000 ユーザーズマニュアル
— 31 —
Useful function for Timer
Recording: Auto Tape Speed
Recording: Auto Tape Speed
With this function activated, the VCR can
change the tape speed and record the
programme in LP mode if not enough
tape remains for recording in SP mode.
1 Press
change the tape speed and record the
programme in LP mode if not enough
tape remains for recording in SP mode.
1 Press
MENU
.
2 Press
5 or ∞ to select “MODE
SET”, then press
OK
or
4.
3 Press
5 or ∞ to select “AUTO SP =
LP TIMER.”
4 Press
OK
or 4.
Each time you press the button, the
setting changes.
ON:
setting changes.
ON:
Select this to allow the VCR to
change the tape speed from SP to
LP when there is not enough tape
length remaining.
change the tape speed from SP to
LP when there is not enough tape
length remaining.
OFF:
Select this not to allow the VCR to
change the tape speed.
change the tape speed.
5 Press MENU to exit from the menu
operations.
Notes:
• The Auto SP-->LP Timer feature is not
• The Auto SP-->LP Timer feature is not
available during OTR (One Touch
Recording) and the feature will not work
properly with any tapes longer than E-
180 or with some tapes of shorter lengths.
Recording) and the feature will not work
properly with any tapes longer than E-
180 or with some tapes of shorter lengths.
• If you have programmed the recorder to
timer-record 2 or more programmes, the
second programme and those hereafter
may not fit on the tape if you set “AUTO
SP-->LP TIMER” to “ON”. In this case,
make sure the mode is not engaged, then
set the tape speed manually during timer
programming.
second programme and those hereafter
may not fit on the tape if you set “AUTO
SP-->LP TIMER” to “ON”. In this case,
make sure the mode is not engaged, then
set the tape speed manually during timer
programming.
• In order to ensure that the recording fits on
the tape, this feature may leave a short non-
recorded section at the end of the tape.
recorded section at the end of the tape.
• There may be some picture noise and sound
disturbance at the point on the tape where
the recorder switches from SP to LP mode.
the recorder switches from SP to LP mode.
• If you perform timer recording with both
PDC and the Auto SP-->LP Timer
activated, and the programme goes
beyond its originally scheduled length,
there may be times when the programme
cannot be recorded in its entirety.
activated, and the programme goes
beyond its originally scheduled length,
there may be times when the programme
cannot be recorded in its entirety.
To check, edit or erase the
programmes
programmes
1 Turn on the VCR and TV.
2 Press
2 Press
TIMER
.
3 Press
5 or ∞ to select
“PROGRAM REVIEW” then press
OK
or 4. The list of the timer
recording programmes appears.
SP
4 Press
OK
or 4 repeatedly to view
the more detailed programme
information.
information.
• When you press the button for the first
time, the detailed programme
information for Programme 1 appears.
By pressing this button repeatedly, you
can review the detailed information of
all other programmes.
information for Programme 1 appears.
By pressing this button repeatedly, you
can review the detailed information of
all other programmes.
• The display panel shows the pro-
gramme start time. Pressing DISPLAY
changes the display to the programme
stop time, then the date and the
channel position.
changes the display to the programme
stop time, then the date and the
channel position.
6 If you want to change the
programme setting shown on the TV
screen, press the following buttons:
screen, press the following buttons:
START +/–
: Changes the start time.
STOP +/–
: Changes the stop time.
SPEED
: Changes the tape speed.
VPS/PDC
: Changes the setting of
the video programme
system.
system.
DATE +/–
: Changes the date.
PROG. +/–
: Changes the channel.
If you want to erase the
programme setting shown on the
TV screen, press
programme setting shown on the
TV screen, press
CLEAR
. The
detailed information of the next
programme appears.
programme appears.
7 Press
MENU
to exit from the menu
operations, if necessary.
Notes:
• You can also check the programmes on
• You can also check the programmes on
the display panel even when the VCR’s
power is off (unless the VCR is in the
Power Save Mode ✈ P.15) or the VCR is
in the Timer mode. However, it is not
possible to cancel or replace the
programmes.
power is off (unless the VCR is in the
Power Save Mode ✈ P.15) or the VCR is
in the Timer mode. However, it is not
possible to cancel or replace the
programmes.
PR START STOP
CH
DATE
1
8:00 10:00
3
24.12
2
10:00 10:45
2
25.12
3
11:30 13:00
1
25.12
4
5
6
7
8
5
6
7
8
[
3] : NEXT
– P1 –
START
STOP
8:00
=
10:00
SP
VPS/PDC OFF
DATE
TV PROG
24.12
3
ITV
[
3] : NEXT
[MENU] : EXIT
1 Programme numbers
2 Start time
3 Stop time
4 Channel position numbers
5 Start date
• If the programme has worked
once for the Daily recording,
“DAILY” will be shown instead
of the start date.
“DAILY” will be shown instead
of the start date.
• If the programme has worked
once for the Weekly recording,
the following week’s date will be
shown instead of the start date.
the following week’s date will be
shown instead of the start date.
How to see the programme list
PR START STOP
CH
DATE
1
8:00 10:00
3
24.12
2
10:00 10:45
2
25.12
3
11:30 13:00
1
DAILY
4
5
6
7
8
5
6
7
8
[
3] : NEXT
1 2 3 4 5
PDC Recording
Now available from some TV stations, PDC
(Programme Delivery Control) is a service
designed to assure safe, accurate timer recording.
With this system, special code signals are
transmitted together with the audio/video signals.
These code signals control your video recorder
and have precedence over the advertised times
which you may have preset into the timer. This
means that your recorder will start and stop
recording when the preset TV programmes
actually start and end – even if the broadcast time
of a preset TV programme is changed. PDC is
currently available nationally on BBC1, BBC2,
Ch. 4 and Ch. 5, except from a few small relay
transmitters. Ch. 3 operates a PDC service only
in a very few areas. All channels intend to offer
this service in due course. Check your TV
programme listing guide for latest information.
If the channel you intend to record does not offer
a PDC service, your VCR will not start recording
if PDC has been selected. Be sure to set PDC to
"OFF" if PDC is not available on your selected
channel.
Now available from some TV stations, PDC
(Programme Delivery Control) is a service
designed to assure safe, accurate timer recording.
With this system, special code signals are
transmitted together with the audio/video signals.
These code signals control your video recorder
and have precedence over the advertised times
which you may have preset into the timer. This
means that your recorder will start and stop
recording when the preset TV programmes
actually start and end – even if the broadcast time
of a preset TV programme is changed. PDC is
currently available nationally on BBC1, BBC2,
Ch. 4 and Ch. 5, except from a few small relay
transmitters. Ch. 3 operates a PDC service only
in a very few areas. All channels intend to offer
this service in due course. Check your TV
programme listing guide for latest information.
If the channel you intend to record does not offer
a PDC service, your VCR will not start recording
if PDC has been selected. Be sure to set PDC to
"OFF" if PDC is not available on your selected
channel.
NOTES:
• When you use Timer Programming, set the
• When you use Timer Programming, set the
start time (PDC time) exactly as advertised
in the TV listing. A different time than
advertised will result in no recording.
in the TV listing. A different time than
advertised will result in no recording.
• PDC recording is also possible when a
satellite tuner or a cable system is connected
to AV2 IN/DECODER on your recorder.
to AV2 IN/DECODER on your recorder.
• PDC recording is also possible via the AV1
IN/OUT connector.
PDC signal is automatically detected if the
VCR receives PDC signal.
VCR receives PDC signal.
VR1000/07-New
99.7.8, 3:34 PM
31