Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Philips
  4. VR1000
  5. ユーザーズマニュアル

Philips VR1000 ユーザーズマニュアル

ダウンロード
ページ / 37
— 9 —
VCR to AV TV Connection Using the SCART Connection
Make this connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference.
And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.
1. Complete the VCR to TV connection
using RF Connection.
2. Connect the scart cable between the AV1
IN/OUT connector of the VCR and the
TV’s 21-pin AV input connector
(SCART).
3. Set the AV1 OUT switch to either one of
the following position,
COMP:
If your TV’s SCART is
compatible only with the regular
video signal.
Y/C:
If your TV’s SCART is
compatible with a signal which
the luminance and chrominance
signals are separated (Y/C
signal). This setting gives you
high-quality S-VHS pictures.
G
ETTING
 
C
ONNECTED
 
U
P
VCR to TV Connection using the RF connection
To connect to a TV with No 21-pin AV input connector.
1 Disconnect the antenna or cable from the TV and the AC power cord
of the TV from the AC outlet.
2 Connect the antenna or cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC outlets.
CAUTION
Do not plug the AC power cords until all
connections are completed.
Connection
Diagram
ANT. IN
AV1 IN/OUT
S OUT
AV2 IN/DECODER
LP30363-002
L
AUDIO
OUT
R
RF OUT
PAUSE
AV1 OUT
COMP. Y/C
LP20654-002
Outdoor antenna
Indoor antenna
Back of VCR
RF coaxial cable
(supplied)
Back of TV
ANT. IN
RF OUT
Cable
To TV`s 21-pin
input connector
(SCART)
To TV
21-pin
SCART cable
From antenna
AV1 OUT
COMP. Y/C
ANT. IN
AV1 IN/OUT
S OUT
AV2 IN/DECODER
LP30363-002
L
AUDIO
OUT
R
RF OUT
PAUSE
AV1 OUT
COMP. Y/C
LP20654-002
VR1000/07-New
99.7.8, 3:29 PM
9