Philips VR1010 ユーザーズマニュアル
— 19 —
A
DVANCED
O
PERATIONS
S-VHS ET
This VCR allows recording in Super
VHS ET (Expansion Technology) mode.
You can record with S-VHS picture
quality on VHS cassettes. However, this
funcion is available only for SP
recording.
VHS ET (Expansion Technology) mode.
You can record with S-VHS picture
quality on VHS cassettes. However, this
funcion is available only for SP
recording.
1
Select S-VHS ET Mode
1 Press the S-VHS ET button on the
front panel to select S-VHS ET
recording mode before recording.
The lamp will lit.
recording mode before recording.
The lamp will lit.
2 Press the button again to cancel
S-VHS ET recording mode after
recording.
recording.
Notes:
• “Recording” setting cannot be changed
• “Recording” setting cannot be changed
during recording, timer recording, or
when the VCR’s power is off.
Also, this function dows not work with
S-VHS tapes.
when the VCR’s power is off.
Also, this function dows not work with
S-VHS tapes.
• To obtain the highest quality recording
and playback pictures over a longer
period on this model, S-VHS ET
recording on S-VHS tape is
recommended.
period on this model, S-VHS ET
recording on S-VHS tape is
recommended.
• You can playback S-VHS ET ET
recordings not only on this VCR but also
on another VHS VCR equipped with
S-VHS ET.
on another VHS VCR equipped with
S-VHS ET.
• It is recommended to specifically label
S-VHS ET recordings so you can easily
distinguish them from regular VHS
recordings.
distinguish them from regular VHS
recordings.
• S-VHS ET recordings can also be played
back on an S-VHS VCR. However, there
may be cases where S-VHS ET playback
is not possible on a particular VCR.
may be cases where S-VHS ET playback
is not possible on a particular VCR.
• Frequent still, frame-by-frame and
slow motion playback may damage the
tape and cause picture degradation.
tape and cause picture degradation.
• With some tapes, better picture quality
may not be obtained even with S-VHS
ET recording. It is recommended that you
do test record beforehand to make sure
whether better results can be obtained.
ET recording. It is recommended that you
do test record beforehand to make sure
whether better results can be obtained.
• High Grade tapes are recommended for
superior results.
• If the playback picture becomes blurred
or interrupted, use a cleaning cassette.
Selecting Recording Format
When shipped from the factory, this
VCR has been set to select
automatically S-VHS format for
recording on an S-VHS tape and VHS
format for recording on a VHS tape.
If you want to make a recording using
VHS format on an S-VHS tape, follow
the procedure below.
VCR has been set to select
automatically S-VHS format for
recording on an S-VHS tape and VHS
format for recording on a VHS tape.
If you want to make a recording using
VHS format on an S-VHS tape, follow
the procedure below.
1
Select VCR Set Up Mode
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“VCR SET UP”
then press
then press
OK/STATUS
.
The VCR Set Up menu appears.
2
Select Recording Format
1 Press
PLAY
5 or
STOP
∞ to select
“S-VHS MODE.”
2 Press
FF
3.
Each time you press the button, the
setting changes.
setting changes.
ON:
Normally select this.
OFF:
Select this when you want to make
a recording using the VHS format
on an S-VHS tape.
a recording using the VHS format
on an S-VHS tape.
3
Finish Setting
Press
MENU
.
DSPC
ON
ON SCREEN MODE ON
TIMER REC SPEED MANUAL
AUDIO OUT HIFI
AUTO SAT
RECORD LINK OFF
TIMER REC SPEED MANUAL
AUDIO OUT HIFI
AUTO SAT
RECORD LINK OFF
S-VHS MODE
ON
SELECT: CHANGE:
END: MENU
END: MENU
Selecting Monitor Sound
This VCR can receive and record stereo
and bilingual programmes, including
the NICAM broadcasts.
and bilingual programmes, including
the NICAM broadcasts.
If you want to change the sound you
listen to while playing back a HiFi
stereo or bilingual tape, press
listen to while playing back a HiFi
stereo or bilingual tape, press
VCR
then press
AUDIO/MUTE
repeatedly.
Each time you press the button, the
sound changes as follows:
sound changes as follows:
HiFi stereo
= HiFi left channel =
HiFi right channel
= Monaural sound
on normal audio track
= Mixed (HiFi
stereo sound + normal audio)
HIFI:
Normally select this mode.
You can play back a HiFi tape in HiFi
stereo mode and monaural tape in
monaural mode.
You can play back a HiFi tape in HiFi
stereo mode and monaural tape in
monaural mode.
HIFI L:
Select this mode when you want to
play back the sound recorded on HiFi
left channel (usually main language)
of a bilingual programme.
play back the sound recorded on HiFi
left channel (usually main language)
of a bilingual programme.
HIFI R:
Select this mode when you want to
play back the sound recorded on HiFi
right channel (usually sub-language)
of a bilingual programme.
play back the sound recorded on HiFi
right channel (usually sub-language)
of a bilingual programme.
NORMAL MONO:
Select this mode when you want to
play back the sound recorded on the
normal audio track of the tape.
play back the sound recorded on the
normal audio track of the tape.
HIFI+NORMAL:
Select this mode when you want to
play back a mixed sound of the HiFi
tracks and the normal audio track.
play back a mixed sound of the HiFi
tracks and the normal audio track.
Note:
• The connections described in “VCR to AV
• The connections described in “VCR to AV
TV Connection” (✈P.7) are required for
HiFi stereo playback.
HiFi stereo playback.
When using the menu to
select monitor sound
select monitor sound
Normally you do not need to use this
menu to select monitor sound.
When you select monitor sound by
pressing
menu to select monitor sound.
When you select monitor sound by
pressing
AUDIO/MUTE
, this menu is
automatically set correctly.
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“VCR SET UP”
then press
then press
OK/STATUS
.
4 Press
PLAY
5 or
STOP
∞ to select
“AUDIO OUT.”
Press
Press
FF
3
to select the sound.
5 Press
MENU
to exit from the menu
operations.
DSPC
ON
ON SCREEN MODE ON
TIMER REC SPEED MANUAL
AUDIO OUT HIFI
AUTO SAT
RECORD LINK OFF
TIMER REC SPEED MANUAL
AUDIO OUT HIFI
AUTO SAT
RECORD LINK OFF
S-VHS MODE
ON
SELECT: CHANGE:
END: MENU
END: MENU
vr1010/75
00.6.29, 4:54 PM
19