Philips VR1100 ユーザーズマニュアル
— 7 —
Display Window
6 Speed indicator
Indicates the tape speed.
SP – Standard Play
LP – Long Play
SLP – Super Long Play
SP – Standard Play
LP – Long Play
SLP – Super Long Play
(For NTSC playback only)
7 Sound output mode indicator
Indicates audio output mode currently
selected. (✈P.25)
selected. (✈P.25)
8 Tape Remaining Time
indicator
Displays the time remaining on tape
after pressing DISPLAY on the front
panel (or
after pressing DISPLAY on the front
panel (or
OK/STATUS
on the remote
control).
9 ] (Cassette-in) indicator
Lights up when there is a cassette in the
VCR.
VCR.
1 Sound level indicator
Indicates the audio signal level.
2 Programme Time Indicators
\
\
\
\
\ : Start programme time.
|
|
|
|
| : Stop programme time.
3 Operation mode indicators
‡
‡
‡
‡
‡ : Lights up during recording.
#
#
#
#
# : Lights up during playback.
*
*
*
*
* : Lights up during a pause.
: “
#
#
#
#
#” lights up and “‡
‡
‡
‡
‡” blinks
during audio dubbing.
:“
#
#
#
#
#jj” lights up and “‡
‡
‡
‡
‡” blinks
during audio dubbing pause.
4
(Timer) indicator
Lights up when the VCR is set for an
unattended recording (timer recording).
(✈P.29, P.30)
unattended recording (timer recording).
(✈P.29, P.30)
5 S-VHS indicator
Lights up while playing a tape recorded
in S-VHS format or with S-VHS ET
function, while recording on an S-VHS
tape using S-VHS format and while
recording on a VHS tape with S-VHS
function.
in S-VHS format or with S-VHS ET
function, while recording on an S-VHS
tape using S-VHS format and while
recording on a VHS tape with S-VHS
function.
10 VCR indicator
Lights up when the VCR/TV button is
pressed or when playback is started or
when scrambled broadcast is received.
pressed or when playback is started or
when scrambled broadcast is received.
11 VPS/PDC indicator
Blinks while VPS/PDC signal detecting
mode is engaged.
mode is engaged.
12 Digital clock/counter/
Channel indicator
• Normally the present time appears.
• When a tape is inserted, the time
• When a tape is inserted, the time
counter appears (and is reset to
00:00:00).
If you always rewind your tapes
completely, you can use this counter
reading as an index to find where a
programme starts.
00:00:00).
If you always rewind your tapes
completely, you can use this counter
reading as an index to find where a
programme starts.
• A channel position number selected
with the TV tuner built in the VCR
appears.
When the external line input is
selected, the following display
appears:
• “L-F” for the front panel Audio/
appears.
When the external line input is
selected, the following display
appears:
• “L-F” for the front panel Audio/
Video jacks.
• “S-1” for the front panel Audio/
S-Video jacks.
• “L-1” for the rear panel AV1 (L-1)
IN/OUT connector.
• “L-2” for the rear panel AV2 (L-2)
IN/DECODER connector.
• “U:01” appears when the video heads
are dirty.(✈P.39)
4
1
3
2
7
8
+8
4
0
6
-15
dB
NORM
SP SLP
VCR
VPS/PDC
5
6
9
10 11
12
Untitled-2
16/08/2000, 15:35
7