Philips vr620 ユーザーズマニュアル

Check the following points once again if you are having some difficulties with your VCR.

Periodic maintenance is required in order to maintain the VCR’s continuous excellent performance.
After a period of time the video heads will require replacement. If cleaning or replacement of the
video heads is required, this service should be performed at an authorized video system service
center.

No power.

TV programme cannot be recorded.

Timer recording cannot be performed.

There is no playback picture, or the playback
picture is noisy or contains streaks.

During a still or slow motion picture, the
picture may contain some vertical jitter when
using a TV which has an automatic vertical
hold control.

✦

Make sure the AC power cord is
correctly connected to an AC outlet.

✦

Make sure the VCR is turned on.

✦

Check the connections between the
VCR, the antenna, and the TV.

✦

Make sure that the record tab on the
back of the cassette is not removed.
(✈P.12)

✦

Set the timer on-time and timer off-
time correctly. (✈P.22)

✦

Make sure that the VCR is turned off
after setting is made. (✈P.21, P.22)

✦

Timer recording may not be per-
formed or stopped if a power
interruption occurs before or during
timer recording.

✦

Select your video channel correctly.
(✈P.8)

✦

Adjust the tracking slowly in either
direction. (✈P.16)

✦

Try to change to another tape, you
may not have this problem.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

620/75

01.5.11, 4:42 PM

27