Philips VRX342AT ユーザーズマニュアル
TO SELECT PUSH NO. SHOWN
1 ON SCREEN ON ON
2 COUNTER ONLY
3 ON SCREEN OFF
2 COUNTER ONLY
3 ON SCREEN OFF
TO END PUSH EXIT
24 On-Screen Status Displays
• If the channel you select has no
broadcast, the screen will become a
solid blue field. The screen will
remain blue until you select an
active channel.
solid blue field. The screen will
remain blue until you select an
active channel.
• You may bring up the status display
at any time by pressing the STA-
TUS/EXIT button.
(The exception is when viewing a
still picture or a slow motion picture,
or when F.FWD or REW(ind) is
pressed during playback.)
TUS/EXIT button.
(The exception is when viewing a
still picture or a slow motion picture,
or when F.FWD or REW(ind) is
pressed during playback.)
• Channel numbers (when tuned) are
displayed for a few seconds.
Helpful Hints
1
Press the VCR button, then press the MENU button to
bring up the main menu display.
bring up the main menu display.
Function
Button
Pressed
Button
Pressed
Time
Channel
Counter
and
Counter
Memory
and
Counter
Memory
Tape
Speed
Speed
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
TO END PUSH EXIT
STOP
12:00 AM
CH10
SLP
M 1:23:45
A status display, which includes the current time, channel, and other
information (see illustration), will appear when you press the STA-
TUS/EXIT button or certain function buttons. The contents of the sta-
tus display may vary. There are three status display modes:
ON SCREEN ON:
information (see illustration), will appear when you press the STA-
TUS/EXIT button or certain function buttons. The contents of the sta-
tus display may vary. There are three status display modes:
ON SCREEN ON:
●
Whenever you press the STOP button or the PLAY button, the sta-
tus display will appear for five seconds.
tus display will appear for five seconds.
COUNTER ONLY:
●
Whenever you press the STOP button or the PLAY button, the sta-
tus display will appear for five seconds. After five seconds, only the
counter will remain on-screen. You must press the STATUS/EXIT
button to remove it.
tus display will appear for five seconds. After five seconds, only the
counter will remain on-screen. You must press the STATUS/EXIT
button to remove it.
ON SCREEN OFF:
●
The status display will not appear when you press function buttons.
You must press the STATUS/EXIT button to see the status display.
You must press the STATUS/EXIT button to see the status display.
To choose the status display mode, follow the steps below.
2
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 REPEAT PLAY OFF
2 ON SCREEN MODE
3 LANGUAGE
4 VCR PLUS+ REF. MAP
2 ON SCREEN MODE
3 LANGUAGE
4 VCR PLUS+ REF. MAP
TO END PUSH EXIT
3
Press the Number 2 button to select ON SCREEN MODE.
4
Press the Number 1 button to select ON SCREEN ON, the
Number 2 button to select COUNTER ONLY, or the
Number 3 button to select ON SCREEN OFF. ON will appear
beside the selected status display mode.
Number 2 button to select COUNTER ONLY, or the
Number 3 button to select ON SCREEN OFF. ON will appear
beside the selected status display mode.
5
Press the STATUS/EXIT button to exit.