CMS Products 676 ユーザーズマニュアル
Monetary Setup
HotCup Operators’ Guide
6740001
42
November, 2007
SELECT BILL VALIDATOR AND OPTIONS
a. Press
, then press
until one of the following is displayed:
NO DBV
No bills will be accepted or there is no bill validator installed (you can
exit the function).
exit the function).
SER.1.2.5.10.20
The serial bill validator is selected and will accept $1, $2, $5, $10,
and $20 bills. Use BILL SELECTION METHOD below to change
the bills which will be accepted.
and $20 bills. Use BILL SELECTION METHOD below to change
the bills which will be accepted.
MDB.1.2.5.10.20
A standard MDB bill validator is selected. It will accept $1, $2, $5,
$10 and $20 bills. Use BILL SELECTION METHOD below to
change the bills which will be accepted.
$10 and $20 bills. Use BILL SELECTION METHOD below to
change the bills which will be accepted.
BILL SELECTION METHOD:
The standard $1, $2, $5, $10 and $20 bills are enabled by pressing
the 1, 2, 5, 6, or 7 key(s), respectively, to display which bill(s) will be
accepted.
the 1, 2, 5, 6, or 7 key(s), respectively, to display which bill(s) will be
accepted.
MDB. <*>
An MDB bill validator which accepts nonstandard bills or tokens is
connected and operating. Press
to enter list of bills.
BILL LIST OPERATION:
Use
and
to scroll through the list of bills.
Use
to turn the bill acceptance ON or OFF.
Use
to move up to the top level screen.
1. 1.00 ON
1. = Bill validator channel 1, each bill has its own channel
1.00 = Bill value
ON = $1.00 bill will be accepted
1.00 = Bill value
ON = $1.00 bill will be accepted
1. 1.00 OFF
OFF = $1.00 bill will not be accepted
TKN
Token bills (same as coupon bills)