CMS Products 676 ユーザーズマニュアル
View Machine Info
HotCup Operators’ Guide
6740001
86
November, 2007
VIEW AMOUNT IN VALIDATOR
(not shown if zero)
(not shown if zero)
a. Press
, then press
until the display shows
DBV XX.XX
.
"
XX.XX
" is the dollar amount in the bill stacker.
b. Press
to show the quantities of bills in the stacker. For example, the display shows
$0120
, meaning that there are 20 dollar bills in the bill stacker. Press
again to show
the quantities of other bills, such as $5s, $10s, or $20s.
c. CONTINUE.
VIEW DIAGNOSTIC MESSAGES
a. Press
. The display shows any of the following diagnostic messages, depending upon
any fault(s) present:
NO ERRORS
None of the following errors are detected:
KEYPAD xy
Key(s) x, y stuck.
ROM ERROR
Key(s) x, y stuck.
RAM ERROR
RAM is not initialized or is not compatible with the currently loaded
software. If this message appears, initialize your RAM by
performing the following procedure:
software. If this message appears, initialize your RAM by
performing the following procedure:
NOTE:
Initializing RAM will erase all your data and drink settings. Be
sure you have written this information down before continuing.
b. Press and hold
until two beeps are heard, and the display shows
FINISHED
.