Metrologic Instruments MS5100 ユーザーズマニュアル

 

 6 

I

NTRODUCTION

 

 

 

 
Disconnect the power supply from the PowerLink cable and turn off power to the 
host system before removing the cable from the scanner. 
 
 

1.  Locate the small ‘pin-hole’ beneath 

the Eclipse logo on the front side of 
the scanner near the end of the 
handle. 

2.  Bend an ordinary paperclip into the 

shape shown. 

3.  Insert the paperclip (or other small 

metallic pin) into the small ‘pin-hole’.  
There will be a faint ‘click’ when the 
connector’s lock releases. 

4.  Pull gently on the cable’s strain-relief 

to remove the cable. 

 
 
 
 

 

Important:  If the PowerLink cable is not fully latched the unit can power 

intermittently.