omnitron-systems-technolo 10-100m2 ユーザーズマニュアル
To change the ingress rate of the UTP port, select option 6.
Change UTP CIR (range 64 to 100000)> 100000
To change the egress rate, select option 4 for the fiber port or option 9 for the UTP port. The egress rates are
displayed. Select the desired egress rate.
displayed. Select the desired egress rate.
PI
SA
Bandwidth Control - iConverter 10/100M2
iConverter, Serial Agent
Identifier -
Chassis Number
= 1
Slot Number
= 1
Model Number
= 8919N-0
1:
64 Kbps
11: 6 Mbps
Fiber Controls
2:
128 Kbps
12: 7 Mbps
--------------------------------------
3:
256 Kbps
13: 8 Mbps
1: Ingress CIR
100000 kbps
4:
512 Kbps
14: 9 Mbps
2: Ingress CBS
150 kB
5:
768 Kbps
15: 10 Mbps
3: Excess Traffic Policy
Drop
6:
1 Mbps
16: 20 Mbps
4: Egress rate
100 Mbps
7:
2 Mbps
17: 30 Mbps
5: Queueing
Fair Weight
8:
3 Mbps
18: 40 Mbps
9:
4 Mbps
19: 50 Mbps
UTP Controls
10: 5 Mbps
20: 100 Mbps
--------------------------------------
6: Ingress CIR
100000 kbps
7: Ingress CBS
150 kB
8: Excess Traffic Policy
Drop
9: Egress rate
100 Mbps
10: Queueing
Fair Weight
Select Fiber Egress Rate from menu above (1-20) >
4.3.3
Layer 2 Control Protocol Filter
Layer 2 Control Protocol Filter provides the ability to discard, forward or tunnel L2CP frames based on the
network requirements. Select ‘discard’, ‘forward’ or ‘tunnel’.
network requirements. Select ‘discard’, ‘forward’ or ‘tunnel’.
The Layer 2 Control Protocol Filter is accessed by selecting option 9 from the Port configuration screen.
PI
SA
L2CP Control - iConverter 10/100M2
iConverter, Serial Agent
Identifier -
Chassis Number = 1 Slot Number = 1 Model Number = 8919N-0
1: Global L2CP Control Forward
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Select the appropriate option to configure the module for the desired operation.
Page 29