Zanussi sd 2811 w ユーザーズマニュアル

6

•  Always switch off the power supply pull out the 

plug before cleaning the appliance!

•  After use, wipe the spindrum dry with a cloth.
•  If dirty washing has been spun, it is necessary 

to rinse the drum out with clear water in order to 

avoid soiling the next load of washing.

•  Clean the exterior of the spin dryer with a damp 

cloth and wipe it dry.

•  Use a solution of water and mild washing up 

liquid only to clean the appliance.

•  Do not use abrasive cleaning agents.
•  Never use petrol or other solvent liquids.
•  The spin dryer requires no other maintenance.

•  

Before contacting your local Service Force 

Centre, check whether the fault is due to one of 

the following minor causes.

The motor does not function:
• Has the fuse blown?
•  Is there damage to the mains cable, plug or  

  socket? Turn off the power supply. Pull out the  

  plug before checking!
•  Never open the motor yourself!

Water does not flow out:
•  

Switch off the power supply. Pull out the plug! 

Check whether the outlet spout is blocked by a 

piece of washing.

•  Press the spin drum from the inside against the  

  outer casing with your hand and remove the  

  piece of washing.

speed:
•  

Please note that the spin dryer normally 

overcomes a certain amount of unbalance itself 

when picking up spin speed. The motor and spin 

drum are suspended flexibly for that reason.

•  However, if the unbalance is too great (brought  

 about by incorrect loading of the spin dryer),  

 the machine cannot pick up spin speed.

The spin dryer “jumps”:
1. Switch off the spin dryer immediately!
2. When the drum has come to a standstill, repack  

  the washing evenly.
3. Reload the spin dryer in accordance with the  

3,0

2800

56