Mercedes Benz 2007 sl 550 ユーザーズマニュアル

ページ / 473
403
Practical hints
Replacing wiper blades
Replacing wiper blades
Placing wiper arms in vertical position
Wiper blades in vertical position
Vehicles with SmartKey
Turn SmartKey to starter switch 
position 1 (
Turn combination switch to wiper 
setting II (
With wiper arms in the vertical position, 
turn SmartKey in starter switch to 
position 0.
Remove SmartKey from starter switch.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the 
vehicle’s on-board electronics have 
status 0) before replacing a wiper blade. 
Otherwise the wiper motor could suddenly 
turn on and cause injury. 
Warning!
G
Wiper blades are components that are sub-
ject to wear and tear. Change the wiper 
blades twice a year, preferably in the spring 
and fall. Otherwise the windows will not be 
properly wiped. As a result, you may not be 
able to observe surrounding traffic condi-
tions and could cause an accident. 
!
To avoid damage to the hood: 
The wiper arms should only be folded for-
ward when in the vertical position.
Never open the hood when the wiper arm is 
folded forward.
!
Never open the hood when the wiper arms 
are folded forward.
Hold on to the wiper when folding the wiper arm 
back. If released, the force of the impact from 
the tensioning spring could crack the windshield.
Do not allow the wiper arms to contact the wind-
shield glass without a wiper blade inserted.
Make sure the wiper blades are properly in-
stalled. Improperly installed wiper blades may 
cause windshield damage.
For your convenience, we recommend that you 
have this work carried out by an authorized 
Mercedes-Benz Center.