Mercedes Benz 2007 sl-class ユーザーズマニュアル

ページ / 473
300
Operation
Tires and wheels
Reactivating Advanced TPMS*
The TPMS must be reactivated when you 
have adjusted the tire inflation pressure to 
a new level (e.g. because of different load 
or driving conditions). The TPMS is then 
recalibrated to the current tire inflation 
pressures.
Using the tire placard on the driver’s 
door B-pillar (
page 286) or, if avail-
able, the supplemental tire pressure 
information on the inside of the fuel 
filler flap (
page 292), make sure the 
tire inflation pressure of all four tires is 
correct.
Press button
è or ÿ on the mul-
tifunction steering wheel repeatedly 
until the standard display menu 
appears in the multifunction display 
(
Press the
j or k button repeat-
edly until you see the current inflation 
pressures for each tire appear in the 
display or the following message ap-
pears in the display
Tire pressure 
displayed after
driving for
a few minutes
Press the reset button (
The following message will appear in 
the multifunction display:
Restart tire
pressure monitor?
Press the 
æ button.
The following message will appear in 
the multifunction display:
Tire pressure monitor restarted
After a few minutes driving, the current 
tire inflation pressure values are ac-
cepted as reference values and then 
monitored.
If you wish to cancel activation:
Press the 
ç button.
Warning!
G
It is the driver’s responsibility to calibrate 
the TPMS on the recommended cold infla-
tion pressure. Underinflated tires affect the 
ability to steer or brake the vehicle. You 
might lose control over the vehicle.
i
Reactivate the TPMS after adjusting the tire 
inflation pressure to the inflation pressure rec-
ommended for the vehicle operating condition. 
Tire pressure should only be adjusted on cold 
tires. Observe the recommended tire inflation 
pressure on the placard on the driver’s door 
B-pillar (
page 286). Some vehicles may have 
supplemental tire pressure information for driv-
ing at high speeds (
page 292) or for vehicle 
loads less than the maximum loaded vehicle con-
dition (
page 292). If such information is pro-
vided, it can be found on the inside of the fuel 
filler flap.