Mercedes Benz 2007 r 350 ユーザーズマニュアル
201
Controls in detail
Automatic transmission
Transmission positions
The current transmission position appears
in the multifunction display.
in the multifunction display.
1 Current transmission position
!
If the current transmission position does not
appear in the multifunction display due to a
malfunction, for example, make sure that the
automatic transmission is in the desired position
by carefully driving off with the transmission in
drive position D and program mode S
(
malfunction, for example, make sure that the
automatic transmission is in the desired position
by carefully driving off with the transmission in
drive position D and program mode S
(
page 206) selected. Do not limit the gear
range.
Effect
ì
Park position
Shift into park position P only
when vehicle is stopped. The
park position is not intended to
serve as a brake when the vehi-
cle is parked. Rather, the driver
should always set the parking
brake in addition to shifting into
park position P to secure the
vehicle.
when vehicle is stopped. The
park position is not intended to
serve as a brake when the vehi-
cle is parked. Rather, the driver
should always set the parking
brake in addition to shifting into
park position P to secure the
vehicle.
If the vehicle’s electrical system
is malfunctioning, the automatic
transmission could remain
locked in park position P.
is malfunctioning, the automatic
transmission could remain
locked in park position P.
왘
Have the vehicle checked as
soon as possible by an autho-
rized Mercedes-Benz Light
Truck Center.
soon as possible by an autho-
rized Mercedes-Benz Light
Truck Center.
!
SmartKey:
If you turn off the engine using the SmartKey and
remove the SmartKey from the starter switch,
the transmission will shift to park position P
automatically. Keep in mind that turning off the
engine with the SmartKey alone will not automat-
ically shift the transmission to park position P.
Only when the SmartKey is removed from the
starter switch, will the transmission automat-
ically shift to park position P.
remove the SmartKey from the starter switch,
the transmission will shift to park position P
automatically. Keep in mind that turning off the
engine with the SmartKey alone will not automat-
ically shift the transmission to park position P.
Only when the SmartKey is removed from the
starter switch, will the transmission automat-
ically shift to park position P.
KEYLESS-GO*:
If you turn off the engine using the KEYLESS-GO
start/stop button and open the driver’s door, the
transmission will shift to park position P auto-
matically. Keep in mind that turning off the
engine using the KEYLESS-GO start/stop button
alone will not automatically shift the trans-
mission to park position P. Only when the
driver’s door is opened, will the transmission
automatically shift to park position P.
If you turn off the engine using the KEYLESS-GO
start/stop button and open the driver’s door, the
transmission will shift to park position P auto-
matically. Keep in mind that turning off the
engine using the KEYLESS-GO start/stop button
alone will not automatically shift the trans-
mission to park position P. Only when the
driver’s door is opened, will the transmission
automatically shift to park position P.
Even though this is possible, make it a practice
to always shift into park position P before turning
off the engine and remove the SmartKey from
the starter switch, or when using KEYLESS-GO*,
before turning off the engine with the start/stop
button and opening the driver’s door.
to always shift into park position P before turning
off the engine and remove the SmartKey from
the starter switch, or when using KEYLESS-GO*,
before turning off the engine with the start/stop
button and opening the driver’s door.