Magnadyne m10 ユーザーズマニュアル

ページ / 12
3
LED Display
Second Vehicle Transmitter Programming: (Random code transmitters does not have this feature)
Your 8-button remote transmitter can be utilized to control a second vehicle security system. To
program the remote control transmitter to a second vehicle, follow the instructions for
Transmitter programming. All programming parameters be the same except for the following:
1. Prior to pushing any button on the transmitter. Press the select (      ) button first.
2. Once the (      ) button is pressed the LED on the transmitter will illuminate for 3.5 seconds. 
3. While the LED is illuminated, press any button on the remote control transmitter.
LED
Function
Off
Disarmed
Slow Flash
Armed
Fast Flash
Passive Arming
On (Solid)
Valet Mode
LED
Function
1 flashes... pause
Zone 1: Trigger on-Board Shock Sensor
2 flashes... pause
Zone 2: Trigger on Trunk/Hood
3 flashes... pause
Zone 3: Trigger on Door Switch
4 flashes... pause
Zone 4: Trigger on Optional Sensor
6 flashes... pause
Zone 6: Trigger on  Ignition Switch
Chirp
Function
1 Chirp
Arm
2 Chirps
Disarmed
3 Chirps
Defective Reminder
4 Chirps
Disarm / Triggered
6 Chirps
Car Locator
Parking Lights
Function
1 Flash
Arm
2 Flashes
Disarmed
3 Flashes
Disarm / Triggered
12 Flashes
Car Locator
Constant On
Under Remote Start
Siren, Horn
Parking Light
LED
Doors
Starter
Dome Light
1. Arming
1 or 3 Chirps
1 Flash
Slow Flash
Locking
Disable
2. Disarming
2 or 4 Chirps
2 or 3 Flashes
Fast Flash
Unlocking
Turns on for 30 Seconds
3. Trigger
Alarming
Flashes
Slow Flash
Disable
Flashes
4. Panic 
Alarming
Flashes
Flashes
5. Car-Jacking Alarming
Flashes
Disable
Flashes
6. Car Locator 6 Chirps
12 Flashes
Chirp Indicators
Parking Lights
Alarm Operating Condition
M10UM  2/20/02  12:26 PM  Page 3