bobcat s205 ユーザーズマニュアル
S205 Skid-Steer Loader
Operation & Maintenance Manual
Operation & Maintenance Manual
102
LOADER STORAGE AND RETURN TO SERVICE
Storage
Sometimes it may be necessary to store your Bobcat
Loader for an extend period of time. Below is a list of
items to perform before storage.
Loader for an extend period of time. Below is a list of
items to perform before storage.
•
Thoroughly clean the loader including the engine
compartment.
compartment.
•
Lubricate the loader.
•
Replace worn or damaged parts.
•
Park the loader in a dry protected shelter.
•
Lower the lift arms all the way and put the bucket flat
on the ground.
on the ground.
•
Put blocks under the frame to remove weight from the
tires.
tires.
•
Put grease on any exposed cylinder rods.
•
Put fuel stabilizer in the fuel tank and run the engine a
few minutes to circulate the stabilizer to the pump and
fuel injectors.
few minutes to circulate the stabilizer to the pump and
fuel injectors.
•
Drain and flush the cooling system. Refill with
premixed coolant.
premixed coolant.
•
Replace all fluids and filters (engine, hyd. / hydro.).
•
Replace air cleaner, heater and air conditioning filters.
•
Put all controls in neutral position.
•
Remove the battery. Be sure the electrolyte level is
correct then charge the battery. Store it in a cool dry
place above freezing temperatures and charge it
periodically during storage.
correct then charge the battery. Store it in a cool dry
place above freezing temperatures and charge it
periodically during storage.
•
Cover the exhaust pipe opening.
•
Tag the machine to indicate that it is in storage
condition.
condition.
Return to Service
After the Bobcat Loader has been in storage, it is
necessary to follow a list of items to return the loader to
service.
necessary to follow a list of items to return the loader to
service.
•
Check the engine and hydraulic oil levels; check
coolant level.
coolant level.
•
Install a fully charged battery.
•
Remove grease from exposed cylinder rods.
•
Check all belt tensions.
•
Be sure all shields and guards are in place.
•
Lubricate the loader.
•
Check tire inflation and remove blocks from under
frame.
frame.
•
Remove cover from exhaust pipe opening.
•
Start the engine and let run for a few minutes while
observing the instrument panels and systems for
correct operation.
observing the instrument panels and systems for
correct operation.
•
Operate machine, check for correct function.
•
Stop the engine and check for leaks. Repair as
needed.
needed.