ONKYO dr-2000 ユーザーズマニュアル

10

• Refer also to the instruction manual of the TV.
• When you connect the DVD Receiver to the TV, be sure to turn off the

power and unplug both the units from the mains before making any
connections.

• Connect the DVD Receiver to the TV directly. If you connect the DVD

Receiver to a VCR, TV/VCR combination, or video selector, the
playback picture may be distorted as DVD videos are copy protected.

(White)

L (White)

R (Red)

To audio outputs

(Red)

(White)

• Connect the plugs securely.
• Note that one audio/video connection cable

and one S video connection cable are
supplied.

Incomplete

Insert completely

: Signal flow

(Red)

Stereo audio connection cable

Video connection cable

L (White)

To audio outputs

R (Red)

(Yellow)

To video input

To S video input

Both the S video and video connections are necessary,
otherwise the picture from equipment to be connected on
the next page may not be output to the TV.

If the TV or monitor has component video
inputs, make this connection. Connecting to
these inputs allows you to enjoy higher quality
picture playback compared to the connections
explained in “Connecting to a TV Without
Component Video Inputs” below.

• Actual labels for component video inputs may vary

depending on the TV manufacturer (ex. Y/C

B

/C

R

, Y/

B-Y/R-Y, etc.).

• In some TVs, the color levels of the playback picture

may be reduced slightly or the tint may change. In
such a case, adjust the TV for optimum
performance.

If the TV or monitor has an S video input, make
the S video connection. The S video connection
will provide higher quality picture playback.

Y

To component
video inputs

P

B

P

R

Stereo audio connection cable

Only pictures from a DVD video or
VIDEO CD played with the DVD
Receiver will be output to the TV.

(Y

ellow)

DO NOT connect the
power cord (mains lead)
at this time.