Motorola dvr dch3416 ユーザーズマニュアル
4 DIAGNOSTICS
57
Field Description
I
dc
INIT_WAIT_DC_
OR_C
OR_C
The DCH3416 is in the interactive initialization state and
waiting for the default configuration or the contention
channel list messages.
waiting for the default configuration or the contention
channel list messages.
I L
WAIT_LM_ACK
The DCH3416 is in the interactive initialization state and
waiting for Link Management Response ACK for Local
Address Message.
waiting for Link Management Response ACK for Local
Address Message.
I SO
WAIT_SO_ACK
The DCH3416 is in the interactive initialization state and
waiting for a Sign On acknowledgement.
waiting for a Sign On acknowledgement.
I
LA
WAIT_LA_OR_S
O
O
The DCH3416 is in the interactive initialization state and
waiting for Logical Address or Sign On with verification
Frequency message.
waiting for Logical Address or Sign On with verification
Frequency message.
S I
INIT_STOPPED
The DCH3416 is in the interactive initialization state and the
TransMode has stopped.
TransMode has stopped.
r
dc
RUN_WAIT_DC_
OR_C
OR_C
The DCH3416 is in the interactive state and waiting for the
default configuration or the contention channel list
messages.
default configuration or the contention channel list
messages.
r
RUNNING
Interactive state is running, sending idle messages, and
waiting for any prepare for poll or MAC messages.
waiting for any prepare for poll or MAC messages.
S
RUN_STOPPED
The interactive run state has stopped and DCH3416 is
waiting for status or a transmission control message.
waiting for status or a transmission control message.
00
INVALID
The interactive state is unknown or invalid.
MAC Abort
Cntr
Cntr
This counter increments every time the MAC layer reaches the cell abort count limit. It is
reset by the successful upstream transmission of a cell: for example, when the DCH3416
receives an ACK. If the counter reaches the MAC abort count limit, the DCH3416
assumes the MAC layer is unavailable due to noise, congestion, or some other problem.
The DCH3416 stops transmitting data upstream, reports an error to the calling function,
and attempts to re-enter the network using the initialization process. 0000 is displayed as
the default or if the MAC Abort CNTR is not configured or unknown.
reset by the successful upstream transmission of a cell: for example, when the DCH3416
receives an ACK. If the counter reaches the MAC abort count limit, the DCH3416
assumes the MAC layer is unavailable due to noise, congestion, or some other problem.
The DCH3416 stops transmitting data upstream, reports an error to the calling function,
and attempts to re-enter the network using the initialization process. 0000 is displayed as
the default or if the MAC Abort CNTR is not configured or unknown.
Socket Port
State
State
The socket mode and activity:
•
UNUSED — The socket is not being used.
•
OPENED — The socket is open.
•
READY — The socket is ready to send or receive.
•
RECEIVING — The socket is receiving data from the application server.
•
SENDING — The socket is sending data to the application server.
•
UNKNOWN — The socket state is invalid or unknown.