Motorola l702cbt ユーザーズマニュアル
54
USING THE PHONE
6.22
Setting the flash time
The default flash time is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to
select
SETUP BS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to
select
FLASH TIME
.
3. Press MENU and then VOL+ or REDIAL/VOL- to
the flash time you want. (8 options are available:
90
,
100
,
110
,
250
,
300
,
400
,
600
and
700MS
)
4. Press MENU to save the setting.
6.23
Setting the area code
1. Press MENU and then VOL+ or REDIAL/VOL- to
select
SETUP BS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to
select
AREA CODE
.
3. Press MENU and enter the area code.
4. Press MENU to save the setting.
4. Press MENU to save the setting.
6.24
Registration
6.24.1
Registering a cordless handset
Up to 5 cordless handsets can be registered to a corded
base. The original cordless handset is pre-registered to
use. Additional cordless handsets must be registered to
the corded base before you can use them.
base. The original cordless handset is pre-registered to
use. Additional cordless handsets must be registered to
the corded base before you can use them.
To register an additional cordless handset,
1. Press MENU and then VOL+ or REDIAL/VOL- to
select
SETUP HS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to
select
REGISTRATION
.
3. Press MENU and then VOL+ or REDIAL/VOL- to
select
YES
or
NO
.
4. Select
YES
and then press MENU to enter the
registration procedure as follows:
1) Press and hold #/
/PAUSE/FORMAT/FIND
for around 4 seconds on the corded base.
2) Place the unregistered cordless handset on the
charger.
3) A confirmation tone is generated if registration
is successful.
HANDSET X
is displayed where
X
denotes the number of handsets, and then the
phone returns to idle.
phone returns to idle.
To register an originally unregistered cordless handset,
follow steps 1) through 3) above.
follow steps 1) through 3) above.