Motorola PR1500 ユーザーズマニュアル
12
General Radio Operation
Universal Connector Cover
The universal connector cover is located on the antenna side of the
radio. It is used to connect certain accessories to the radio.
Note: To prevent damage to the connector, shield it with the
Note: To prevent damage to the connector, shield it with the
connector cover when not in use.
Remove the Connector Cover
Attach the Connector Cover
1
Insert a flat-bladed
screwdriver into the area
between the bottom of the
cover and the slot below the
connector.
screwdriver into the area
between the bottom of the
cover and the slot below the
connector.
2
Hold the top of the cover with
your thumb while you pry the
bottom of the cover away
from the radio with the
screwdriver.
your thumb while you pry the
bottom of the cover away
from the radio with the
screwdriver.
1
Insert the hooked end of the
cover into the top of the
connector. Press downward
on the cover’s top to seat it
into the slot.
cover into the top of the
connector. Press downward
on the cover’s top to seat it
into the slot.
2
Press the cover’s lower tab
below the connector until it
snaps in place.
below the connector until it
snaps in place.
Rainure
supérieure
Rainure
inférieure
Extrémité
à crochet
Languette
Tab