Dynex DX-FMRDS ユーザーズマニュアル
6
Using the mobile FM
transmitter and charger
transmitter and charger
To set up and use your mobile FM transmitter and
charger:
1 Insert the mobile FM transmitter firmly into your car’s
cigarette lighter or power socket.
2 Tune your car's FM stereo to an unused FM frequency.
3 Plug the connector on the end of the cable into your
3 Plug the connector on the end of the cable into your
iPod.
Note: To disconnect, unplug it from your iPod.
4 Start your iPod player. Your mobile FM transmitter
turns on when an audio signal is detected.
5 Select the frequency from Step two above using the
up and down arrows on the front of your mobile FM
transmitter.
transmitter.
Tip: The mobile FM transmitter works best
when the iPod volume is set between 50%
to 75% of maximum. After you have tuned
to the frequency and begun transmitting,
adjust the volume to a comfortable level.
to 75% of maximum. After you have tuned
to the frequency and begun transmitting,
adjust the volume to a comfortable level.
Tip: Your iPod may not automatically turn
off. Be sure to unplug it to stop playback
and to deactivate charging before exiting
your car.
and to deactivate charging before exiting
your car.