Motorola s1204 ユーザーズマニュアル

Using additional handsets

29

On the handset:
1. Press 

m

, scroll 

d

 to 

 and press 

m

.

2. Scroll 

d

 to 

 and press 

m

.

3. Enter the base number (1 - 4). 

The base numbers that are already in use flashes. The 
display shows 

. 

4. When the handset finds the base signal, the display 

shows 

, where 

 indicates the base 

identification number.

5. The display will ask for the PIN to be entered. Enter the 

4 digit PIN code (default = 0000) and press 

m

. 

You will hear a beep if the registration is successful. 
The handset is automatically assigned an available 
handset number. Use this number when making 
internal calls.

NOTE
If registration is not successful the first time, please repeat 
the process again in case the base registration period ran 
out of time. If the base is not found after a few seconds, the 
handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the 
registration will fail. You must de-register another handset 
before you can register a new one.

IMPORTANT
DECT GAP Profile only guarantees that basic calling 
functions will work correctly between different makes/types 
of handset and base. There is a possibility that certain 
devices such as Caller ID will not work correctly.
On the base:
1. Press and hold 

a

 for 3 seconds until you hear two 

beeps. The base will remain in registration mode for 90 
seconds.

On the handset:
Follow the registration instructions given in your handset’s 
user guide.

If your S12 handset is registered to more than one base (e.g. 
one at work and one at home), you can select which base to 
use. 
Each handset can be registered with up to four bases.
1. Press 

m

, scroll 

d

 to 

 and press 

m

.

The display shows 

.