Motorola symbol ls7708 ユーザーズマニュアル

7-5

To set up the scanner:

1.

Connect the USB interface cable to the host port of the scanner.

2.

Connect the peripherals, if any, to their respective ports.

3.

If connecting to peripherals, connect the power supply to the scanner’s power port.

4.

Plug the series A connector of the USB interface cable into the USB host or hub, or plug the Plus Power connector of the USB 
interface cable in an available port of the IBM SurePOS terminal.

5.

Select the USB device type. See 

.

6.

On first installation when using Windows, the software displays a prompt to select or install the “Human Interface Device” 
driver. To install the “Human Interface Device” driver provided by Windows click Next through all the choices and click 
Finished on the last choice. The scanner powers up during this installation.

7.

If not using a North American keyboard, scan the appropriate country bar code under 

.

Interface cables vary depending on configuration. The connectors may be different from the examples 
illustrated, but the steps to connect the scanner are the same. See 

 for connection 

information.

Host Port

Host

To EAS 

(optional)

Power Port

Power Supply

RS-232 Auxiliary Device

Hand-Held Scanner