Motorola surfboard svg2501u ユーザーズマニュアル

B 

 

 
Product Overview • MAC Label 

SVG2501 Series Wireless Voice Gateway • User Guide 

550885-001-a  
 

Use any Ethernet port to connect an Ethernet-equipped computer, 
hub, bridge, or switch using an RJ-45 cable. 

Green LED — Indicates a 100Base-T data rate connection 

Amber LED — Indicates a 10Base-T data rate connection 

• 

When LED is ON — Indicates there is no data traffic and a 

connection is established 

• 

When LED is FLASHING — Indicates data activity is detected on 

the port 

• 

When LED is OFF — Indicates the device is not powered ON or 

there is no Ethernet connection 

Note: When running on battery power, the Ethernet connection will 
shut off. 

Resets the gateway 

It may take 5- to 30 minutes to find and lock on the appropriate 
communications channels. 

Press and hold the RESET button for five seconds or longer to 
restore the factory default settings. 

Coaxial cable connection to the cable wall outlet 

+14VDC Power connector 

Available on SVG2501U models only 

For Windows computers only — DO NOT connect a Mac or UNIX

®

 

computer to the USB port. 

The SVG2501 Media Access Control (MAC) label contains the MAC address which is a 
unique, 48-bit value that identifies each Ethernet network device.  

To receive data service, you must provide the MAC address marked HFC MAC ID to 
your Internet service provider. 

To receive VoIP service, you may have to provide the MTA MAC ID to your VoIP service 
provider.