Motorola time warner dct6200 ユーザーズマニュアル

 

DCT6200/DCT6208 User Guide 

 

35 

TROUBLESHOOTING 

Before calling your service provider, review this troubleshooting guide. 
This information is to help you quickly solve a problem. If your problem 
still exists, contact your service provider. 

Problem Possible 

Solution 

The DCT* will not 
power on 

Verify that the AC power cord is connected to the DCT* 
and an AC outlet. 

If the DCT* is connected to a switched outlet on another 
unit, verify that that unit is powered on. 

Press the 

POWER

 button on the DCT* front panel instead 

of the remote control. The batteries in the remote control 
may be depleted. 

The DCT* may have received a software update and 
may not power on while the new software is being 
installed. Try again in a few minutes. 

The remote control 
does not work 

Verify that the remote control is in “Cable” mode. 

Verify that there are no obstructions between the remote 
control and the DCT*. Aim the remote control directly at 
the DCT* front panel, not the TV or VCR. 

The angle between the remote control and the DCT* 
may be too large. Stand in front of the DCT* and not too 
far to either side. 

Press and release operation keys one at a time, firmly 
and deliberately. 

Try changing channels using the buttons on the DCT* 
front panel. 

Check the batteries in the remote control. Install new 
batteries if needed.