Motorola time warner dct6200 ユーザーズマニュアル
DCT6200/DCT6208 User Guide
35
TROUBLESHOOTING
Before calling your service provider, review this troubleshooting guide.
This information is to help you quickly solve a problem. If your problem
still exists, contact your service provider.
This information is to help you quickly solve a problem. If your problem
still exists, contact your service provider.
Problem Possible
Solution
The DCT* will not
power on
power on
Verify that the AC power cord is connected to the DCT*
and an AC outlet.
and an AC outlet.
If the DCT* is connected to a switched outlet on another
unit, verify that that unit is powered on.
unit, verify that that unit is powered on.
Press the
POWER
button on the DCT* front panel instead
of the remote control. The batteries in the remote control
may be depleted.
may be depleted.
The DCT* may have received a software update and
may not power on while the new software is being
installed. Try again in a few minutes.
may not power on while the new software is being
installed. Try again in a few minutes.
The remote control
does not work
does not work
Verify that the remote control is in “Cable” mode.
Verify that there are no obstructions between the remote
control and the DCT*. Aim the remote control directly at
the DCT* front panel, not the TV or VCR.
control and the DCT*. Aim the remote control directly at
the DCT* front panel, not the TV or VCR.
The angle between the remote control and the DCT*
may be too large. Stand in front of the DCT* and not too
far to either side.
may be too large. Stand in front of the DCT* and not too
far to either side.
Press and release operation keys one at a time, firmly
and deliberately.
and deliberately.
Try changing channels using the buttons on the DCT*
front panel.
front panel.
Check the batteries in the remote control. Install new
batteries if needed.
batteries if needed.