Motorola XPR 7350 ユーザーズマニュアル

Radio on page 5.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 3.
OR
After the third incorrect password, your radio enters into 
locked state. A tone sounds and the LED double blinks 
yellow.

NOTE: The radio is unable to receive any call, including 

emergency calls, in locked state.

Procedure:
Wait for 15 minutes. Repeat Steps 1 to 4 in Accessing the 
Radio from Password on page 33.
OR
Power up the radio, if you have powered down the radio during 
locked state:

A tone sounds and the LED double blinks yellow.

Wait for 15 minutes. Repeat Steps 1 to 4 in Accessing the 
Radio from Password on page 33.

This feature allows you to use your radio with a Bluetooth-
enabled device (accessory) via a Bluetooth connection. Your 
radio supports both Motorola and COTS (Commercially 
available Off-The-Shelf) Bluetooth-enabled devices. 

Bluetooth operates within a range of 10 meters line of sight. 
This is an unobstructed path between your radio and your 
Bluetooth-enabled device.

It is not recommended that you leave your radio behind and 
expect your Bluetooth-enabled device to work with a high 
degree of reliability when they are separated.

At the fringe areas of reception, both voice and tone quality will 
start to sound "garbled" or "broken". To correct this problem, 
simply position your radio and Bluetooth-enabled device closer 
to each other (within the 10-meter defined range) to re-establish 
clear audio reception. Your radio’s Bluetooth function has a 
maximum power of 2.5 mW (4 dBm) at the 10-meter range. 

Your radio can support up to 3 simultaneous Bluetooth 
connections with Bluetooth-enabled devices of unique types. 
For example, a headset, a scanner, and a PTT-Only Device 
(POD). Multiple connections with Bluetooth-enabled devices of 
the same type are not supported.  

Refer to your respective Bluetooth-enabled device’s user 
manual for more details on your Bluetooth-enabled device’s full 
capabilities.