Creda hb41304 ユーザーズマニュアル
INSTALLATION INSTRUCTIONS
23
OPERATIONAL CHECKS
After installation, check for gas soundness. The supply pressure can be checked at the
grill injector. Access to the injector is by first removing the baffle at the front of the grill
fastened by two screws. Then remove the fastening screw on the right hand side of the
burner and slide the burner off the injector. Ensure that the grill burner is correctly
located under the fixing screw on reassembly.
Fit the battery. Fit the hotplate burner bodies, caps and pan supports. Referring to the
instructions for use where necessary,
grill injector. Access to the injector is by first removing the baffle at the front of the grill
fastened by two screws. Then remove the fastening screw on the right hand side of the
burner and slide the burner off the injector. Ensure that the grill burner is correctly
located under the fixing screw on reassembly.
Fit the battery. Fit the hotplate burner bodies, caps and pan supports. Referring to the
instructions for use where necessary,
1. Check that the hotplate and grill burners ignite correctly and burn with a steady
flame. Check for a steady flame on the low setting.
2. Check that with the main oven set to mark 9, the burner ignites at low rate, and then
increases to full rate within 60 seconds. Leave the oven full on with the door closed
for 10 minutes, and check that when the control is turned to the ‘E’ setting that the
flame reduces.
for 10 minutes, and check that when the control is turned to the ‘E’ setting that the
flame reduces.
Instruct the user on the operation of the cooker.