Marantz dv4003 ユーザーズマニュアル

Be sure to insert each 
plug fully for the best 
con nec tion. The plugs 
and jacks are color-cod ed 
to make con nec tion 
easier.

By connecting this DVD player to another 
Marantz audio component using a supplied 
system control cable, you can remotely 
operate the components as a single system.

•    When con nect ing to a com po nent with a 

remote sensor, be sure to connect the REMOTE 
CON TROL IN jack of this DVD player to 
the REMOTE CON TROL OUT jack of the 
com po nent with the remote sensor.

•    When connecting to component which is 

not equipped with a remote sensor, be sure 
to connect the com po nent to the REMOTE 
CONTROL OUT jack of this DVD player. 

This easy setup is the minimum set of 
connections you need to start watching 
DVD-Video discs. Both sound and picture 
are fed directly to your TV using the 
sup plied audio/video cables. For other 
possible con nec tions, see pages 11 and 12.

•    Before making or changing any rear panel 

connections, make sure that all components are 
switched off and unplugged from the wall outlet.

•    While a connected component is turned on, 

do not unplug the power cord of this DVD 
player from the wall outlet. The speaker may be 
damaged.

•    When connecting to a standard TV, select 

4:3 LETTER - BOX or 4:3 PAN SCAN in the TV 
Aspect setting (see page 40).

•    Connect the video output of the player directly 

to your TV. Because the player is de signed to 
support an Analog Protection System copy card, 
there are cases when proper playback will be 
not be possible if the player is connected to the 
TV through a VCR and images are recorded and 
played on the VCR.

•    The player’s video output and S1 output are not 

be progressive.

•      

     When using this DVD player independently, set 

this switch to INT. (INTERNAL). When using this 
DVD player in a system with a Marantz receiver 
equipped with a remote sensor, set the switch to 
EXT. (EXTERNAL).

Connect to a composite video 
input on your TV using the 
supplied Audio/Video cable.

Plug into a standard 
AC wall outlet.

Connect to a pair of stereo audio 
inputs on your TV using the 
sup plied Audio/Video cable.

See Note:
Remote Switch 
(for USA only)