Multiquip MVC-40G ユーザーズマニュアル

7. If the engine is running properly, slowly return (push inward)

the choke lever (Figure 13) to the 

“OPEN” position. If the

engine has not started repeat steps 1 through 6.

8.

To begin compacting, place the throttle lever (Figure 16) in
the "

fast" (run) position.

1. Move the throttle lever  to the  IDLE position  (Figure 17) and

run the engine for three minutes at low speed.

2. After the engine 

cools, turn the engine ON/OFF switch to the

“OFF” position (Figure 18).

3. Place the 

fuel shut-off  lever  (Figure 19)  in the OFF

position.

1. Move the throttle lever quickly to the 

SLOW  position, and

place the engine ON/OFF switch in the 

OFF position.

ALWAYS run engine at 

full speed while compacting.