Linear AE-100 ユーザーズマニュアル

10

Multiple Unit Telephone Wiring

Up to four AE-100 units may be connected to the same dedicated 
telephone line to form a simple network. Connecting multiple units allows 
transferring programming data (either the directory entries only or the 
entire memory’s contents) from the “master” unit to the other sub-units.

✦ NOTE: For a multiple-unit installation to function properly, be sure 

1.  Mount and install the master and sub-units.
2.  Choose one unit to be the “master” unit and act as the “hub”. 

Usually this would be a centrally located or “main” unit.

3.  Route 2-conductor telephone cable from the master 

unit to each of the sub-units (see fi gure).

4.  Connect each sub-unit’s 2-conductor telephone cable 

its TELEPHONE terminals (polarity not important).

5.  At the master unit, connect all the sub-unit 

2-conductor telephone cables to the master unit’s 
TELEPHONE terminals (polarity not important).

1.  Mount and install the master and sub-units.
2.  Choose one unit to be the “master” unit. Usually this 

would be a centrally located or “main” unit.

3.  Route 2-conductor telephone cable from the 

master unit to the closest sub-unit.

4.  Route 2-conductor telephone cable from the 

sub-unit in Step 3 to the next sub-unit.

5.  Repeat for all sub-units (see fi gure).
6.  Connect the 2-conductor telephone cables to the TELEPHONE 

terminals in each unit (polarity not important).

TELEPHONE
TERMINALS

TELEPHONE
TERMINALS

TELEPHONE
TERMINALS

TELEPHONE
TERMINALS

TELEPHONE
TERMINALS

TELEPHONE
TERMINALS

TELEPHONE
TERMINALS

TELEPHONE
TERMINALS