Metra Electronics 99-5819 ユーザーズマニュアル
99-5819 KIT ASSEMBLY
3
ISO MOUNT RADIO PROVISION WITH POCKET
Cut and remove the top (2) mounting
holes off of the radio housing.
Note: The notch in the housing
should be on top. (Figure A)
holes off of the radio housing.
Note: The notch in the housing
should be on top. (Figure A)
1
Slide the included brackets onto the
sides of the radio housings pocket
from the back of the housing
forward. (Figure B)
sides of the radio housings pocket
from the back of the housing
forward. (Figure B)
2
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Figure C)
unit with the screws supplied with
the unit. (Figure C)
3
Slide the head unit into the radio
opening until the side clips engage.
(Figure D)
opening until the side clips engage.
(Figure D)
4
Snap the trim plate into the Radio
Housing. (Figure D)
Housing. (Figure D)
5
Continue to final assembly.
*
Note: Refer also to the instructions included with the aftermarket radio.
CUT HERE -TOP LEG ONLY
CUT HERE -TOP LEG ONLY
CUT
CUT
A
B
C
D