Hitachi VT-F372A ユーザーズマニュアル

Getting Started (Initial Setup) 

27 

 

Here is what the options mean: 

1  ANTENNA/CABLE 
Press 1 to select the type of receiving setup you have: 
<ANT.> 

Internal or external antenna 

<CATV1> Ordinary 

cable 

<CATV2> 

Alternate cable (if CATV1 doesn't give you the channels you expect) 

2  AUTO CHANNEL SETTING 
Press 2 to automatically program the VCR to receive all the channels that come in on 
your antenna or cable. 

3  ADD OR ERASE CHANNEL 
Press 3 to bring up a screen that lets you add new channels or limit the channels to the 
ones you most often watch. 

4  VCR CODING 
Press 4 to enable the remote control to control a second VCR. Options are <VCR1> 
and <VCR2>. 

5  MOVIE RETURN 
Press 5 to select whether you want prerecorded movies (safety tab removed) to 
automatically rewind, eject, and turn off the power when the movie is over and no 
prerecorded signals exist. Options are <ON> and <OFF>. 

6  AUDIO PLAYBACK 
Press 6 to control how the audio signal is processed by the VCR. Options are <HIFI> 
and <LINEAR>. 

7  STEREO/MONO 
Press 7 to control how the audio signal is recorded and sent to the TV.  Options are 
<STEREO> and <MONO>. 

8  SECOND AUDIO 
Press 8 when you are ready to record a second audio program.  Options are <OFF> 
and <ON>. 

This is easy to do and important for your later timed recordings. 
You'll need to set the clock when first hooking up your VCR, and any time the power 
goes out more than 1 hour. 

When you first plug in the VCR or after a power outage, the clock display will read "--:--
".