Mitsubishi t255 ユーザーズマニュアル
45
When enabled, Auto Redial will automatically redial a call. There will be
a delay and a tone will be heard before Auto Redial.
a delay and a tone will be heard before Auto Redial.
Default setting = Disable
When enabled, Any Key Answer allows you to answer a call by pressing
any key except Mute softkey, End/Back key, and Mode key.
any key except Mute softkey, End/Back key, and Mode key.
Default setting = Enable
If your network supports the Voice Privacy feature, your call will be
encrypted so that no one can access your call. Your phone always
attempts to use privacy mode. If your service provider’s system does not
support this feature, or if the phone is on an analog channel, Voice
Privacy Off! displays and a warning tone sounds. You can turn this
warning tone on or off.
encrypted so that no one can access your call. Your phone always
attempts to use privacy mode. If your service provider’s system does not
support this feature, or if the phone is on an analog channel, Voice
Privacy Off! displays and a warning tone sounds. You can turn this
warning tone on or off.
To enable/disable Privacy Tone,
Default setting = Disable
To enable/disable Send Caller ID,
Default setting = Send (Normal)
Press
and select 4 Preferences, 2 Call Setup.
Select 4 Auto Redial.
Select Enable or Disable and press OK softkey.
Select Enable or Disable and press OK softkey.
Press
and select 4 Preferences, 2 Call Setup.
Select 5 Any Key Answer.
Select Enable or Disable and press OK softkey.
Select Enable or Disable and press OK softkey.
Press
and select 4 Preferences, 2 Call Setup.
Select 6 Privacy Tone.
Select Enable or Disable and press OK softkey.
Select Enable or Disable and press OK softkey.
Press
and select 4 Preferences, 2 Call Setup.
Select 7 Send Caller ID.
Select 2 Send (Normal). If Block Caller ID Code needs to be
changed, press Setup softkey. Enter Block Caller ID Code
and press OK left softkey.
To disable, press 1 Don’t Send and press OK softkey.
Select 2 Send (Normal). If Block Caller ID Code needs to be
changed, press Setup softkey. Enter Block Caller ID Code
and press OK left softkey.
To disable, press 1 Don’t Send and press OK softkey.
1
2
3
2
3
1
2
3
2
3
1
2
3
2
3
1
2
3
2
3
4