Datalogic Scanning DS8100A ユーザーズマニュアル

SOFTWARE CONFIGURATION 

 

 

 
This operating mode causes the reader to be connected to an external Presence Sensor 
using EXT TRIG/PS A and 

ts. 

During the active phase of the presence sensor, the DS8100A reader tries to acquire and 
correctly decode the code. 

 case the decoding phase is successful, the barcode characters are transmitted on the 

serial interface. Otherwise, a no read message is sent. 
 
 

 

EXT TRIG/PS B inpu

In

 

 
This operating mode does not require the connection to an external Presence Sensor. 
When working in this mode the reader is continuously scanning. The reading phase is 
activated each time a barcode enters the reading zone. The reader stops reading after an N 
number of scans without a code. 
Barcode characters are transmitted on the serial interface. In case of a failed reading phase 
no message is sent to the host computer.