Datalogic Scanning DS8100A ユーザーズマニュアル

 

 
 

 
This product conforms to the applicable requirements contained in the European Standard for 
electrical safety EN-60950 at the date of manufacture. 
 

 

 

 

 
 

 
The following information is
authorities and refers to the c

 provided to comply with the rules imposed by international 

orrect use of the DS8100A scanner. 

though staring directly at the laser 

 at the date of manufacture. The reader is classified as a Class 2 laser 

here is a safety device which allows the laser to be switched on only if the motor is rotating 

bove the threshold for its correct scanning speed. 

 
 

 

 
This scanner utilizes up to 4 low-power laser diodes. Al
beam momentarily causes no known biological damage, avoid staring at the beam as one 
would with any very strong light source, such as the sun. 
 
Avoid that the laser beam hits the eye of an observer, even through reflective surfaces such 
as mirrors, etc. 
 
This product conforms to the applicable requirements of both EN60825-1 and 

 

CDRH 21 CFR1040
product according to EN60825-1 regulations and as a Class II laser product according to 
CDRH regulations. 
 
T
a

 

Use of controls or adjustments or performance of procedures other than those 
specified herein may result in exposure to hazardous visible laser light. 

 
 
The laser light is visible to the human eye and is emitted from the window on the side of the 
scanner (Figure A).